cumulus 1.9.4 / ERROR RATES IN gust of wind

[marcotheon]

Dear friends of the weather and our team good afternoon to everyone.
I have wireless weather station and software cumulus 1.9.4, and in front a problem in the data. Joined daily measurements
and almost time this shows me gust 188Km / h, and I do not know if the problem is the power of the console ...

I hope to find someone to help us and unrelated. Because as it is, is ugly to see error values​​.

Thank you all.
Sincerely,

Theologian monk.

[steve]

Have you selected the correct station type, as in this FAQ? http://wiki.sandaysoft.com/a/FAQ#I_get_ ... h_readings

If you have selected the correct station type, please zip up the diags folder and attach it to a reply here.

[marcotheon]

this?

[steve]

That's only one of the files; I'd like the entire Diags folder, please, zipped up.

[marcotheon]

That's only one of the files; I'd like the entire Diags folder, please, zipped up.

[marcotheon]

That's only one of the files; I'd like the entire Diags folder, please, zipped up.

[steve]

I asked for the folder ZIPPED UP! PLEASE! Good grief. Instructions are in the post linked to above "Please click here before posting...". It's a pain having to deal with separate files like that.

It looks like you keep changing your station type. Does your station have solar sensors (for Lux and UV) or not? If you select the wrong type you will get incorrect data, as in the FAQ that I linked to.

It looks like your station doesn't have solar sensors. Select the correct station type. If you still get high wind values, you can use the 'spike removal' settings on the calibration screen in Cumulus, to get Cumulus to filter them out. Instructions are in the help.

[marcotheon]

Thank you very much, I hope to have good results ..