Cumulus Support

I have published yesterday, with a GNU General Public License v3 a new software for an Arduino based RF receiver for this low level weather stations:
Auriol H13726 / Ventus W155 / Hama EWS 1500 / Meteoscan w155 w160 / Alecto WS-3500 / Balance RF-WS100

It is compatible with Cumulus, via easyweather.dat file. It can also receive RF data from extra sensors ( a better temperature / humidity sensor, for exemple) when used with a specialy designed RF emiter board.

All info on this page: MeteoCercal - Auriol / Ventus Weather Station Tools


Hope it can be usefull for someone.

Latest Version: AuriolDuino_RF_Receiver_v400_b006 - Release date: 12/05/2014

Edited - Now, info about latest releases are at the bottom of the first post! See above, please.

Downloads and more info : MeteoCercal - Auriol / Ventus Weather Station Tools

There are great news for the owners of weather stations like the Auriol H13726, Ventus W155, Hama EWS 1500, Meteoscan w155 / w160, Alecto WS-3500 and Balance RF-WS100.

The AuriolDuino system was merged into the WeatherDuino Pro2 system.

From now on, owners of Auriol weather stations (and compatibles) can also benefit from all the advantages offered by the WeatherDuino Pro2 system:

- Davis Vantage emulation
- Hardware data logger
- Works with Cumulus1 or Cumulus MX software.
- And many others features...

For all the weather stations mentioned above, all that is needed is a receiver unit based in a WeatherDuino Pro2 RX board. For those that will prefer a fully assembled and tested receiver unit, it is available too.

Later you can upgrade your weather station to a full WeatherDuino Pro2 system, which supports a wide range of types and brands of weather instruments, and continue to use the same receiver unit.