Hi Steve, I'm not certain this is a bug, but it happened when I started Cumulus (or at least tried to, as it fails to start now) for the first time in ages.
However, I did edit today.ini after I had closed it down, in order to remove a rainfall rate spike caused by removing spider webs before today's rain started. Today.ini looks ok to me, but I've included it below, along with notes on the 2 edited lines, in case I've done something stupid with it that I am failing to see.
Edit: I'm using Cumulus v1.9.3 (1055), but I've just noticed the note above to upgrade to 1.94, so will do so now and see if that helps. ... it didn't.
thanks, Gordon
Today.ini
[General]
Date=18/11/2013
Timestamp=18/11/2013 3:21:00 PM
CurrentYear=2013
CurrentMonth=11
CurrentDay=18
[Wind]
Speed=6
SpTime=12:45
Gust=16
Time=11:18
Bearing=5
Direction=N
Windrun=15.9581480026245
DominantWindBearing=7
DominantWindBearingMinutes=382
DominantWindBearingX=103.658790588379
DominantWindBearingY=951.474060058594
[Temp]
Low=11.1000003814697
LTime=13:41
High=18.2000007629395
HTime=09:28
Total=5356.90380859375
Samples=383
ChillHours=11.8166580200195
HeatingDegreeDays=1.1459037065506
CoolingDegreeDays=0
[Pressure]
Low=1009.99377441406
LTime=15:18
High=1012.09338378906
HTime=09:06
[Rain]
High=21.8 (was 30.89923.....)
HTime=13:29 (was 9:59)
Start=424.200012207031
Yesterday=0
LastTip=2013-11-18 15:16
HourlyHigh=9.88800621032715
HHourlyTime=14:07
ConsecutiveRainDays=0
ConsecutiveDryDays=1
RG11Today=0
[ET]
Annual=1148.2578125
Startofday=1147.24182128906
[Humidity]
Low=59
High=96
LTime=09:35
HTime=14:47
[Solar]
SunshineHours=1.08333301544189
SunshineHoursToMidnight=5.80002069473267
HighSolarRad=1048
HighSolarRadTime=09:41
HighUV=7.40000009536743
HighUVTime=09:41
SunStart=0
[HeatIndex]
High=18.2000007629395
HTime=09:28
[AppTemp]
Low=10.8149681091309
LTime=13:41
High=18.0744609832764
HTime=09:29
[WindChill]
Low=11.1000003814697
LTime=13:41
[Dewpoint]
Low=9.24329471588135
LTime=12:11
High=11.8200998306274
HTime=14:58
[NOAA]
LatestMonthlyReport=
LatestYearlyReport=
[FineOffset]
FOSensorClockTime=0
FOStationClockTime=0
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
bug report?
- Gordon-Loomberah
- Posts: 230
- Joined: Mon 17 Aug 2009 7:51 am
- Weather Station: Davis VP2 + Solar and UV
- Operating System: Windows 10 home
- Location: Loomberah, Australia
- Contact:
bug report?
You do not have the required permissions to view the files attached to this post.
Loomberah Weather: http://gunagulla.com
- steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: bug report?
This is the same problem as in this thread: https://cumulus.hosiene.co.uk/viewtopic.php?f=13&t=10831
I don't know what causes it, it occurs before any of my code runs. You're both using Windows 7, so perhaps a recent Windows update is involved. I'll ask on the Delphi forums to see if anyone has any suggestions.
I don't know what causes it, it occurs before any of my code runs. You're both using Windows 7, so perhaps a recent Windows update is involved. I'll ask on the Delphi forums to see if anyone has any suggestions.
Steve