Welcome to the Cumulus Support forum.

Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080

VVP known issue?

Discussion specific to Davis weather stations
Post Reply
BigOkie
Posts: 283
Joined: Tue 28 May 2013 1:06 am
Weather Station: Davis VP2 Plus
Operating System: Raspian Bookworm (RPi 3b)
Location: Tulsa, OK

VVP known issue?

Post by BigOkie »

In the diags files, I see a lot of these while running VVP:

Code: Select all

08/07/2013 14:15:00.715 : Writing today.ini, LastUpdateTime = 08/07/2013 2:15:00 PM raindaystart = 6.11999988555908 rain counter = 6.11999988555908
08/07/2013 14:18:21.543 : VP2: LoadCurrentVantageData_V, error = -32701
08/07/2013 14:19:02.824 : VP2: LoadCurrentVantageData_V, error = -32701
08/07/2013 14:19:23.511 : VP2: LoadCurrentVantageData_V, error = -32701
08/07/2013 14:20:00.590 : Writing today.ini, LastUpdateTime = 08/07/2013 2:20:00 PM raindaystart = 6.11999988555908 rain counter = 6.11999988555908
08/07/2013 14:22:48.918 : VP2: LoadCurrentVantageData_V, error = -32701
08/07/2013 14:24:07.215 : VP2: LoadCurrentVantageData_V, error = -32701
08/07/2013 14:24:32.480 : VP2: LoadCurrentVantageData_V, error = -32701
08/07/2013 14:25:00.043 : Writing today.ini, LastUpdateTime = 08/07/2013 2:25:00 PM raindaystart = 6.11999988555908 rain counter = 6.11999988555908
I do note where you see this happening on occasion; it just started happening for me. It never gets to the point where it messages me on the console. So I just shut it down and switched back to direct connections via the USB serial port.

My question is simply this .... is this a known issue and has anyone figured out a way around it if so?

If not, no big deal. I can just dump VVP for now and run direct.

Thanks.
User avatar
steve
Cumulus Author
Posts: 26672
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: VVP known issue?

Post by steve »

The two issues that I know about with VVP when used with the Davis DLL which Cumulus uses are that when sending logger data it sometimes sends 'garbage' entries, and that reads of data sometimes fail, similar to what you're seeing. I had thought that the latter only happened when reading logger data, but it's a long time ago since I looked at it, and I may be misremembering. I think the problem was something to do with the reads of EEPROM data which the DLL does. If you turn on the diagnostic logging in VVP you should see exactly what command the DLL is sending just before the error.

Both of the problems that I found were acknowledged to exist by the author of VVP when he investigated, but he was unable to do anything about them. Davis weren't being particularly helpful to him, I seem to remember.
Steve
Post Reply