Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

Error report in Cumulus ...

Discussion and questions about Cumulus weather station software version 1. This section is the main place to get help with Cumulus 1 software developed by Steve Loft that ceased development in November 2014.
Post Reply
User avatar
odintheterrible
Posts: 110
Joined: Wed 16 Jan 2013 8:18 am
Weather Station: Brandson 304577 & GW1000
Operating System: Windows 10 64-bit
Location: Torre-Pacheco, Murcia, Spain

Error report in Cumulus ...

Post by odintheterrible »

Greetings,
Set up the weather station a while back and everything has been running very smoothly with Cumulus apart from a small glitch when the batteries got a bit low in the wireless display and started loosing contact with the sensors. Happily now resolved with fresh batteries.
However, over the last few days I've been getting an error warning ...

Image

Not sure what the 'issue' is but I have noticed that the anemometer has frozen a couple of times overnight due to the low temperatures during the last 3 or 4 nights ... I have a spare unit here and intend to replace the bearing with a higher quality unit in the hope that this will cure this little hiccup ;-)

I've zipped all the relevant stuff so that you can, if inclined, have a look for yourselves as any assistance with this would help

Many thanks in anticipation

O T T
cumulus_error_2013-01-16.zip
You do not have the required permissions to view the files attached to this post.
"Qui Custodit Ipsos Custodes ? ..."

Duct Tape is like 'The Force' ... it has a 'Light Side' AND a 'Dark Side' and it binds the Universe together !
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Error report in Cumulus ...

Post by steve »

I'm guessing that you looked at the file using notepad, so it wouldn't be obvious what the problem was. In notepad++, you would see the problem:
2013-01-16 09_07_51-C__Users_steve_AppData_Local_Temp__PA391_Jan13log.txt - Notepad++.png
Those 'nul' characters look like they are supposed to be your 08:20 log entry; there was some kind of problem at the time which caused them to be written instead of the real data. Just remove them, with Cumulus stopped.
You do not have the required permissions to view the files attached to this post.
Steve
User avatar
odintheterrible
Posts: 110
Joined: Wed 16 Jan 2013 8:18 am
Weather Station: Brandson 304577 & GW1000
Operating System: Windows 10 64-bit
Location: Torre-Pacheco, Murcia, Spain

Re: Error report in Cumulus ...

Post by odintheterrible »

Greetings,
Thanks for the speedy heads up :-)
"Qui Custodit Ipsos Custodes ? ..."

Duct Tape is like 'The Force' ... it has a 'Light Side' AND a 'Dark Side' and it binds the Universe together !
Post Reply