Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
WS-2080
-
- Posts: 4
- Joined: Tue 13 Sep 2011 1:55 am
- Weather Station: WS-2080
- Operating System: Windows 7/Vista
- Location: Myerstown, PA
WS-2080
I use the offset (the first one) and the program tells me it can located it and gives me an error. I tried the 2nd one and the same thing. So what can I do?
-
- Posts: 448
- Joined: Thu 05 Aug 2010 10:02 pm
- Weather Station: WS2080
- Operating System: W7
- Location: GA, USA
- Contact:
Re: WS-2080
Did you follow the installation guide for Cumulus?
Did you close Easy Weather before you started Cumulus?
Did you close Easy Weather before you started Cumulus?
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: WS-2080
You need the first Fine Offset station type (without solar sensor). If Cumulus says 'station not found', then possibly as Randy suggests, you have Easyweather running, or if not then Windows hasn't detected the station. If it's definitely plugged in properly, then it may be faulty. You could try a full reset (remove batteries and USB cable).
Steve
-
- Posts: 4
- Joined: Tue 13 Sep 2011 1:55 am
- Weather Station: WS-2080
- Operating System: Windows 7/Vista
- Location: Myerstown, PA
Re: WS-2080
I can't see how the USB cable when bad, but that is what it was. It's working fine now. Thanks for the reply.
P.S. Steve - Great improvement since the last one. Keep up the good work.
P.S. Steve - Great improvement since the last one. Keep up the good work.