b4064 Chart Select-a-Period

wurzelmac · Post by **wurzelmac** » Tue 10 Dec 2024 4:17 pm

Can anybody check the chart "Select-a-Period" within the MX dashboard, please. Is this extreme indoor temperature only here on my side? Btw, this is the only chart that has this issue. All others are showing the value correct. Thanks in advance.

wurzelmac · Post by **wurzelmac** » Tue 10 Dec 2024 4:26 pm

Ah I see the same behavior in AI2 dashboard.

broadstairs · Post by **broadstairs** » Tue 10 Dec 2024 4:31 pm

Well no I only see normal values although not sure what pelletslager is

anyway major difference on mine is that I have two scales on the left side and one on the right. Not sure if that makes a difference, I have temp and mph on left and humidity on right!

Stuart

wurzelmac · Post by **wurzelmac** » Tue 10 Dec 2024 4:45 pm

Thanks for looking, then I have to investigate here on my side. (Pelletslager is an extra temp sensor in a wood storage room.)

broadstairs · Post by **broadstairs** » Tue 10 Dec 2024 5:28 pm

I just realised that yours looks like the AI, does it work on the normal dashboard? I don't use the AI at all. I just tried the AI and it seems OK for me.

Stuart

PaulMy · Post by **PaulMy** » Tue 10 Dec 2024 5:31 pm

Hi,
No, I don't see any abnormalities in my installs for Indoor Temp.

Enjoy,
Paul

wurzelmac · Post by **wurzelmac** » Tue 10 Dec 2024 5:42 pm

broadstairs wrote: ↑Tue 10 Dec 2024 5:28 pm I just realised that yours looks like the AI, does it work on the normal dashboard? I don't use the AI at all. I just tried the AI and it seems OK for me.

Stuart

On both the MX and AI2 dashboards, see my first post (MX) and the second (AI2).

wurzelmac · Post by **wurzelmac** » Tue 10 Dec 2024 5:49 pm

Maybe it has something to do with decimal (point vs comma), because the value is exact multiplied by 10 - waiting for the weekend till Mark chimes in.

PaulMy · Post by **PaulMy** » Tue 10 Dec 2024 6:21 pm

I've looked in my Cumulus.ini and there are a couple of InTemp settings.

Code: Select all

InTempOffset=0
InHumOffset=0

InTempMult=1
InHumMult=1

Anything abnormal in yours?

Enjoy,
Paul

wurzelmac · Post by **wurzelmac** » Tue 10 Dec 2024 7:03 pm

Thanks, Paul, but it is really ONLY THIS very graph that is scaling indoor temp wrong. All ok with simply all other graphs, gauges, values, etc. both local within the dashboards as well as online on my website.

wurzelmac · Post by **wurzelmac** » Wed 11 Dec 2024 12:32 pm

I would like to add three screenshots to demonstrate what is happening.
Chart "Recent-Select-a-Chart" scales Indoor Temp correct.
Chart "Select-a-Period" scales Indoor Temp wrong (multiplied with 10), as soon as I hit "Clear Series" the chart is correct again.
And all other places that display Indoor Temp do display the value correct, as I have investigated so far.

mcrossley · Post by **mcrossley** » Wed 11 Dec 2024 3:07 pm

Could you check what data this returns please...
http://<MX_IP_ADDRESS>:8998/api/graphdata/intvtemp.json?start=1731283200&end=1733875200

wurzelmac · Post by **wurzelmac** » Wed 11 Dec 2024 3:52 pm

This is the output what it returns. I copied it and saved it as a .txt file.

mcrossley · Post by **mcrossley** » Wed 11 Dec 2024 4:46 pm

Thanks, found the problem, and yep comma decimals!

wurzelmac · Post by **wurzelmac** » Wed 11 Dec 2024 5:34 pm

Wow, concerns only this single chart. Thanks for taking time.

Cumulus Support

b4064 Chart Select-a-Period

b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period

Re: b4064 Chart Select-a-Period