Weather station offline

[malmeida]

I replaced FTP site/Enable of Cumulus.ini from 0 to 1 and FTP logging from 0 to 1. I attach the last MXdiags.

FTP-20241129-102407.7z

[mcrossley]

Well the log shows it logging in OK, but nothing after that.

Rather than editing the Cumulus.ini file (not recommended), please use the configuration interface. All the settings are there (unlike C1 where some were only in the ini file). Setting via the interface also means you do not have to restart Cumulus for them to take effect.

[malmeida]

At last the problem is resolved. Now Cumulus.ini has;
FTP site/Enabled=1, Host=178.159.12.246, FTP logging=0, EnableRealTime=1 and Active FTP=0.
Thank you for your help.

[malmeida]

I edited Cumulus.ini because I am far from the station and the way I comunicate with the station is using "www.remote.it". I don't know how to use Admnistrative interface with this way.

[ConligWX]

just connect to the CumulusMX Console via IP address with the port 8998. I vpn to my home network from work and just open a browser window and connect to cumulusmx like so:

http://192.168.1.50:8998

thats it.

Note: the ip address above is just used as an example.

[SamiS]

just connect to the CumulusMX Console via IP address with the port 8998. I vpn to my home network from work and just open a browser window and connect to cumulusmx like so:

http://192.168.1.50:8998

thats it.

Note: the ip address above is just used as an example.

The remote.it is not an vpn service, it seems to be something more like teamviewer etc, proxying via cloud service. However in its use cases they also mention connecting to a private webserver (that cmx dashboard indeed is), so it should be possible. How does one configure it as a connectable service in remote.it application, unfortunately I don’t know.