Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Build 3191 sync messages
Moderator: mcrossley
-
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Build 3191 sync messages
Hi
Installed 3191 yesterday - ran fine until this afternoon. seeing "Start syncronising with console", immediately followed by Stop Syncronising. Seems to be happening every 10 seconds or so, then stops for a while. Startup messages below. Have run with debug and logging - two files attached.
Thanks Ron.
Cumulus MX v.3.19.0 build 3191
Working Dir: C:\CumulusMX\
Cumulus running at: http://localhost:8998/
http://192.168.20.3:8998/
Open the admin interface by entering one of the above URLs into a web browser.
Today.ini = data\today.ini
Last update=2022-07-07T17:20:00
Looking for Fine Offset station
Fine Offset station found
Connected to station
7/07/2022 5:29:24 PM
Type Ctrl-C to terminate
Downloading Archive Data
Completed read of history data from the console
Start Synchronising with console
Normal running
Stop Synchronising
Start Synchronising with console
Stop Synchronising
Start Synchronising with console
Stop Synchronising
Start Synchronising with console
Stop Synchronising
Installed 3191 yesterday - ran fine until this afternoon. seeing "Start syncronising with console", immediately followed by Stop Syncronising. Seems to be happening every 10 seconds or so, then stops for a while. Startup messages below. Have run with debug and logging - two files attached.
Thanks Ron.
Cumulus MX v.3.19.0 build 3191
Working Dir: C:\CumulusMX\
Cumulus running at: http://localhost:8998/
http://192.168.20.3:8998/
Open the admin interface by entering one of the above URLs into a web browser.
Today.ini = data\today.ini
Last update=2022-07-07T17:20:00
Looking for Fine Offset station
Fine Offset station found
Connected to station
7/07/2022 5:29:24 PM
Type Ctrl-C to terminate
Downloading Archive Data
Completed read of history data from the console
Start Synchronising with console
Normal running
Stop Synchronising
Start Synchronising with console
Stop Synchronising
Start Synchronising with console
Stop Synchronising
Start Synchronising with console
Stop Synchronising
You do not have the required permissions to view the files attached to this post.
- HansR
- Posts: 5964
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: Build 3191 sync messages
This issue might be similar to this one.
You could try the same solution and if it works, wait for the fix to be released.
You could try the same solution and if it works, wait for the fix to be released.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
-
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Re: Build 3191 sync messages
OK - have turned off synchronisation. See how we go for a while.
-
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Re: Build 3191 sync messages
Running 30 minutes now. Data logs updating OK every 10 minutes. Weather Underground updating OK. Dashboard etc looks ok. No spurious messages as yet.
- HansR
- Posts: 5964
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: Build 3191 sync messages
So we assume it is solved like th eother issue.
When Mark is back he'll release the fix no doubt.
When Mark is back he'll release the fix no doubt.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
-
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Re: Build 3191 sync messages
Build 3194 installed. Synchronisation turned on. Strange messages on console. Please advise.
You do not have the required permissions to view the files attached to this post.
- mcrossley
- Posts: 12765
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Build 3191 sync messages
Yes, I have made the sync process a bit more chatty on the console - it's still a work in progress to get the right balance.
What is slightly concerning is that the sync process did not detect any change in your solar data, was the data current on the console at that time?
And another thought comes to mind - there is no point in looking for the solar data changing during local night time! I'll have to think about changing the regular re-sync to run during daylight hours for FO with solar.
EDIT: I see it was way after your local sun set, so actually it's no surprise the solar data wasn't changing!
What is slightly concerning is that the sync process did not detect any change in your solar data, was the data current on the console at that time?
And another thought comes to mind - there is no point in looking for the solar data changing during local night time! I'll have to think about changing the regular re-sync to run during daylight hours for FO with solar.
EDIT: I see it was way after your local sun set, so actually it's no surprise the solar data wasn't changing!
- rogerthn
- Posts: 518
- Joined: Thu 11 Apr 2013 6:31 pm
- Weather Station: Ecowitt GW1000/GW1003
- Operating System: Raspberry Pi OS bullseye aarch64
- Location: Trollhättan Sweden
- Contact:
Re: Build 3191 sync messages
Are those the strange messages?
There are also messages like below in then MXdiags-file.
and
Please let me know if you would like to have the full 21M file!
Maybe zipped
Code: Select all
2022-07-14 14:51:06.918 Normal running
2022-07-14 23:57:36.204 Connected to station
2022-07-14 23:58:11.262 Connected to station
2022-07-14 23:58:36.199 Connected to station
....
Code: Select all
2022-07-14 23:56:40.471 GetLiveData: Error - Value cannot be null.
Code: Select all
2022-07-14 23:57:37.524 GetLiveData: Invalid response
Maybe zipped
-
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Re: Build 3191 sync messages
Thanks Mark
I'll upload a logfile after sunrise my time.
What's the message about no station clock change time found?
I'll upload a logfile after sunrise my time.
What's the message about no station clock change time found?
- mcrossley
- Posts: 12765
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Build 3191 sync messages
That just means that MX did not detect a change in the logging block used. That is the only reliable way I can see of detecting when the minute rolls over on the console. That will only happen once every archive interval on your console, so unless you use a 1 minute logging interval it is unlikely to be detected.
I have come up with a scheme to "shift" the regular resyncs to within daylight hours of you have a station that measures solar data. Next release.
I have come up with a scheme to "shift" the regular resyncs to within daylight hours of you have a station that measures solar data. Next release.
- mcrossley
- Posts: 12765
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Build 3191 sync messages
I think those messages are symptomatic of either an unreliable USB connection, or the station returning bad data.rogerthn wrote: ↑Fri 15 Jul 2022 1:10 pm Are those the strange messages?There are also messages like below in then MXdiags-file.Code: Select all
2022-07-14 14:51:06.918 Normal running 2022-07-14 23:57:36.204 Connected to station 2022-07-14 23:58:11.262 Connected to station 2022-07-14 23:58:36.199 Connected to station ....
andCode: Select all
2022-07-14 23:56:40.471 GetLiveData: Error - Value cannot be null.
Please let me know if you would like to have the full 21M file!Code: Select all
2022-07-14 23:57:37.524 GetLiveData: Invalid response
Maybe zipped
- rogerthn
- Posts: 518
- Joined: Thu 11 Apr 2013 6:31 pm
- Weather Station: Ecowitt GW1000/GW1003
- Operating System: Raspberry Pi OS bullseye aarch64
- Location: Trollhättan Sweden
- Contact:
Re: Build 3191 sync messages
Then the questions is, whom is "fiddling" with my WiFi and/or my WS Ecowitt GW1000/GW1003 around midnight
It did start at 2022-07-14 23:56:40, the last message at 02:05:09
- mcrossley
- Posts: 12765
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Build 3191 sync messages
Sorry, I thought you had a Fine Offset station as that is what this thread is about.
If you want to start a new thread and zip up your file I can take a look. But the answer will be the same I think, either network issues or the station doing "something" or too busy.
If you want to start a new thread and zip up your file I can take a look. But the answer will be the same I think, either network issues or the station doing "something" or too busy.
-
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Re: Build 3191 sync messages
Mark this all looks good now. Started at 09.15 - through to 17.15 (dusk now).
No messages on the console. Logfile attached.
No messages on the console. Logfile attached.
You do not have the required permissions to view the files attached to this post.