Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
b3182
Moderator: mcrossley
- HansR
- Posts: 5870
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bullseye
- Location: Wagenborgen (NL)
- Contact:
b3182
This version does not seem to give valid winddata anymore.
And it appears to be worse than that.
Device: Ecowitt WS80 / http protocol
logfile attached.
And it appears to be worse than that.
Device: Ecowitt WS80 / http protocol
logfile attached.
You do not have the required permissions to view the files attached to this post.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
- mcrossley
- Posts: 12689
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: b3182
Odd as the Ecowitt protocol has not been changed for the last few betas...
Your device is not sending wind data, outdoor temperature or humidity.
The rain I will have to check when I get back to my computer. The value in the response (12.787 inches) matches what your CMX is expecting.
You could try switching the Local API station type and see if that is working.
Are your sensors still registered and the data is showing in the phone app?
Your device is not sending wind data, outdoor temperature or humidity.
The rain I will have to check when I get back to my computer. The value in the response (12.787 inches) matches what your CMX is expecting.
You could try switching the Local API station type and see if that is working.
Are your sensors still registered and the data is showing in the phone app?
-
- Posts: 1255
- Joined: Mon 09 Jul 2012 8:40 pm
- Weather Station: Davis VP2 Cabled
- Operating System: Windows 10 Pro
- Location: Auckland, New Zealand
- Contact:
Re: b3182
Hi, Have Davis VP2 on Win 10
Build 3182
In stationsettings.html
Data Series Visibility
Temperature Data
and
Humidity Data
When changing Indoor temperature to ticked ( or unticking )
or
When changing Indoor Humidity to ticked ( or unticking )
When clicking Save Settings, this message is displayed:-
I do NOT have an Ecowitt Station.
Build 3182
In stationsettings.html
Data Series Visibility
Temperature Data
and
Humidity Data
When changing Indoor temperature to ticked ( or unticking )
or
When changing Indoor Humidity to ticked ( or unticking )
When clicking Save Settings, this message is displayed:-
However Save Settings still works.Error: 500(error) - Error processing Ecowitt sensor mapping: Object reference not set to an instance of an object.
I do NOT have an Ecowitt Station.
- HansR
- Posts: 5870
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bullseye
- Location: Wagenborgen (NL)
- Contact:
Re: b3182
Everything on the Ecowitt side is fine, running and delivering data.mcrossley wrote: ↑Sat 30 Apr 2022 9:19 pm Odd as the Ecowitt protocol has not been changed for the last few betas...
Your device is not sending wind data, outdoor temperature or humidity.
The rain I will have to check when I get back to my computer. The value in the response (12.787 inches) matches what your CMX is expecting.
You could try switching the Local API station type and see if that is working.
Are your sensors still registered and the data is showing in the phone app?
Please note that everything was fine, CMX gathering data etc... Just before the update.
I shutdown CMX, copied the new CMX in place and started CMX.
No changes on my side.
Note: not sure what rain value that should be... Yearly?
And why inches when working in mm.
I am not changing to local API device, it is the HTTP I am working with. If that is not wanted it should not be available.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
-
- Posts: 704
- Joined: Thu 20 Aug 2020 8:35 am
- Weather Station: Davis VP2 Plus
- Operating System: RPiv4 64bit Linux 12 Bookworm
- Location: Jersey Channel Islands
- Contact:
Re: b3182
I downloaded the ver B3182, stopped CMX, extracted the new version and rebooted the RPi to get things started again.
CMX appeared to start automatically, (systemctl auto start is in place) but it stalled halfway.
I stopped CMX and then restarted using systemctl stop/start and all now seems fine.
For completeness I ran CUtils website with no problems, all my customisations remain in place and working.
My setup is a Davis console running through a Meteo-Pi logger to a RPi.
CMX appeared to start automatically, (systemctl auto start is in place) but it stalled halfway.
I stopped CMX and then restarted using systemctl stop/start and all now seems fine.
For completeness I ran CUtils website with no problems, all my customisations remain in place and working.
My setup is a Davis console running through a Meteo-Pi logger to a RPi.
- Buford T. Justice
- Posts: 423
- Joined: Fri 17 Aug 2012 9:21 pm
- Weather Station: Ecowitt GW1002
- Operating System: Windows 11 Pro
- Location: USA
Re: b3182
I also cannot get 3182 to work with my Ecowitt GW1000 setup. I reinstalled 3173 and all is well again.
- HansR
- Posts: 5870
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bullseye
- Location: Wagenborgen (NL)
- Contact:
Re: b3182
@AndyKF650, @Buford T. Justice : Please post the corresponding logfiles!
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
-
- Posts: 704
- Joined: Thu 20 Aug 2020 8:35 am
- Weather Station: Davis VP2 Plus
- Operating System: RPiv4 64bit Linux 12 Bookworm
- Location: Jersey Channel Islands
- Contact:
Re: b3182
Hi Hans
As requested here is my current working log file for info. The MySQL errors are being worked on, this is my current development project.
As requested here is my current working log file for info. The MySQL errors are being worked on, this is my current development project.
You do not have the required permissions to view the files attached to this post.
- HansR
- Posts: 5870
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bullseye
- Location: Wagenborgen (NL)
- Contact:
Re: b3182
Thanks @Andy, but that is the log where all was OK (apart from the SQL).
Do you still have the log where it stalled?
Do you still have the log where it stalled?
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
- mcrossley
- Posts: 12689
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: b3182
Ok, so if the apps work, then the local API is working.
All I can suggest is you reboot your gateway and see if that fixes it.
Maybe, but your log shows that your station is just not sending the data.
CMX uses two values the rainratein, and yearlyrainin.
Inches because Ecowitt chose to use imperial units on the HTTP protocol.
All I can think of is your rain sensor is set to use the piezo sensor in Station Settings | Ecowitt Sensor Maps?
OK, your choice, I just suggested it as a test, but if the Ecowitt app is working the Local API is working.
I recommend using the local API over the HTTP as it offers more data, more timely. But if you have something against using it I really don't mind
The HTTP station type is offered as an alternative because not all Ecowitt stations have the local API. Also some people may already be using the local API for other software and do not wish to overload their gateway.
- mcrossley
- Posts: 12689
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: b3182
Thanks, I've had another report of this.
The error message is benign, as you have found the other settings will be saved correctly.
The error will not occur if your station type is set to either of the Ecowitt stations.
Fixed for the next patch release.
- HansR
- Posts: 5870
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bullseye
- Location: Wagenborgen (NL)
- Contact:
Re: b3182
OK. Rebooted (through the app) and that seems to work.
Could the cause of the failure be that a transmission was cut-off during the stopping of CMX?
I asked this before, but would it not be a good idea to reboot the GW1x00 from CMX (if possible) at error situations? It reboots within 20 seconds!
No piezo sensor mapping. I think just the prior point: the GW1100 was confused.
I will think about this. There is no hard reason for me to stick with HTTP but habit and that I am OK with it. Just the last time I switched I ran into other problems with double data at some point. Anyway... irrelevant for the current issue apparently.mcrossley wrote: ↑Sun 01 May 2022 9:18 am OK, your choice, I just suggested it as a test, but if the Ecowitt app is working the Local API is working.
I recommend using the local API over the HTTP as it offers more data, more timely. But if you have something against using it I really don't mind
The HTTP station type is offered as an alternative because not all Ecowitt stations have the local API. Also some people may already be using the local API for other software and do not wish to overload their gateway.
Problem solved.
Next time I will reboot before I signal an issue but still think an automatic reboot originated by CMX might solve this type of problems.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
- HansR
- Posts: 5870
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bullseye
- Location: Wagenborgen (NL)
- Contact:
Re: b3182
In addition to my prev post and possibly related is the following chart where apparently there appeared to be missing some temperature (after I shutdown CMX and gave up until the reboot described above). the GW1100 seems to recover itself at 23h15
And beside that: during catch up FeelsLike and WindChill apparently are calculated but the Dewpoint is not, that only starts showing values when the catchup is completed at 11h30 just now. Humidity is not shown either but that is not in this chart.
EDIT: and it probably is the absence of Humidity which causes the dewpoint to be absent.
And beside that: during catch up FeelsLike and WindChill apparently are calculated but the Dewpoint is not, that only starts showing values when the catchup is completed at 11h30 just now. Humidity is not shown either but that is not in this chart.
EDIT: and it probably is the absence of Humidity which causes the dewpoint to be absent.
You do not have the required permissions to view the files attached to this post.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3