I've just moved my from Cumulus 1 to Cumulus MX and am having an issue with the logging interval
It is set to 10 minutes in Cumulus and also ten minutes through Easyweather.
When computer is off readings are accumulated at 10 minute intervals as expected and when the computer is booted and Cumulus MX runs this data is downloaded and is shown on the charts page being recorded at ten minute intervals................ but if the computer is left running these recording intervals are being logged at 1 minute intervals - far too much data for me.
Any suggestions how to correct it please
Running on Windows 10
Thanks
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
(Note that 4.1.0 (build 4024) - 05 June 2024 remains available, but usage of this version is not recommended - particularly for Davis stations - and the included utility in this distribution for migrating to v4 is known to contain errors affecting conversion of dayfile.txt)
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
(Note that 4.1.0 (build 4024) - 05 June 2024 remains available, but usage of this version is not recommended - particularly for Davis stations - and the included utility in this distribution for migrating to v4 is known to contain errors affecting conversion of dayfile.txt)
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
FO Logging Interval
-
- Posts: 2546
- Joined: Wed 08 Jun 2011 11:19 am
- Weather Station: Davis Vantage Pro 2 + Ecowitt
- Operating System: GNU/Linux Ubuntu 22.04 LXC
- Location: Alcaston, Shropshire, UK
- Contact:
Re: FO Logging Interval
The one minute graph interval for live data (i.e not read from your logger archive) is what is used on Cumulus MX, regardless of station type. Cumulus 1 was the same.
Sorry, that doesn't really answer your question - I think the answer may be that you can't change it, but wait for somebody like @mcrossley to confirm.
Sorry, that doesn't really answer your question - I think the answer may be that you can't change it, but wait for somebody like @mcrossley to confirm.
-
- Posts: 29
- Joined: Mon 12 Jul 2021 4:18 pm
- Weather Station: FO3083 and VP2
- Operating System: Win 11
Re: FO Logging Interval
Thanks for response Freddie. Must admit I hadn’t noticed it on C1, but the graphs are not quite so well defined on C1, plus the fact I was running it on a laptop with a much smaller screen at the time.
I’ll check it out
I’ll check it out
- mcrossley
- Posts: 12966
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: FO Logging Interval
As freddie says that's just the way it works, and C1 was the same, though C1 generated the graph images rather than sending the data to generate them locally.
-
- Posts: 29
- Joined: Mon 12 Jul 2021 4:18 pm
- Weather Station: FO3083 and VP2
- Operating System: Win 11
Re: FO Logging Interval
Thanks for response Mark. Hadn’t noticed it before but I ran C1 on a laptop with 11 inch screen, running mx on a pc with 22inch screen so the minute temperature changes, coupled with not much temperature change through the day meant even small deviations were very visible.