Hello
I have a different problems I do not understand.
Have installed Cumulus v3.8.4 (3094) on my Oregon Scientific WMR88
but I do not get all the data to be displayed on my weather page.
What is missing is the temperature,
I see the wind, the rain, the direction but not the temperature. It can be seen in my display, I have two temperature sensors but it is not visible on the website. It only shows 0 (zero) on the temperature. FTP works because it sends data from the wind, the rain, the direction.
Where should I start troubleshooting?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Strange problem ?!
Moderator: mcrossley
- MrMagoot
- Posts: 5
- Joined: Fri 04 Mar 2016 3:23 pm
- Weather Station: Oregon WMR88
- Operating System: Windows 10 Pro
- Location: Oaxen, island in Stockholm archipelago
- Contact:
Strange problem ?!
Oregon Scientific WMR88
http://amrdata.se/weather
http://amrdata.se/weather
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Strange problem ?!
Switch on debug and data logging, let it run for at least half an hour then post your mxdiags file here.
- MrMagoot
- Posts: 5
- Joined: Fri 04 Mar 2016 3:23 pm
- Weather Station: Oregon WMR88
- Operating System: Windows 10 Pro
- Location: Oaxen, island in Stockholm archipelago
- Contact:
Re: Strange problem ?!
Here is the file, please tell me if you need more information !
You do not have the required permissions to view the files attached to this post.
Oregon Scientific WMR88
http://amrdata.se/weather
http://amrdata.se/weather
- MrMagoot
- Posts: 5
- Joined: Fri 04 Mar 2016 3:23 pm
- Weather Station: Oregon WMR88
- Operating System: Windows 10 Pro
- Location: Oaxen, island in Stockholm archipelago
- Contact:
Re: Strange problem ?!
This morning, all of a sudden, the FTP works. My weather page is updated as it should, but the temperature still does not work. I see the temperature in my weather station, I have two sensors. But it does not upload to my weather page. Has reset the weather station X number of times. No difference. During the day I will reset my two temperature sensors. I suspect that the hardware is faulty and it may be time to change the weather station.
Oregon Scientific WMR88
http://amrdata.se/weather
http://amrdata.se/weather
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Strange problem ?!
So the station is sending temp/hum packets for channels 0 and 3.
I'll have a look at the code later - which channel are you expecting to be used as the outdoor temperature?
I'll have a look at the code later - which channel are you expecting to be used as the outdoor temperature?
- MrMagoot
- Posts: 5
- Joined: Fri 04 Mar 2016 3:23 pm
- Weather Station: Oregon WMR88
- Operating System: Windows 10 Pro
- Location: Oaxen, island in Stockholm archipelago
- Contact:
Re: Strange problem ?!
Today i have closed one of the thermometers, so now I only have one that uses channel 2
Everything works normal but i still missing themperatur as i said earlyer
Add new file from MXdiag
Everything works normal but i still missing themperatur as i said earlyer
Add new file from MXdiag
You do not have the required permissions to view the files attached to this post.
Oregon Scientific WMR88
http://amrdata.se/weather
http://amrdata.se/weather
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Strange problem ?!
OK, after looking at the code it seems that channel 1 is used for the outdoor temperature (chan 0 for indoor, and chans 2-n are mapped to the extra temperature sensor channels).
Can you see the outdoor temp appearing against extra temperature #1?
Can you see the outdoor temp appearing against extra temperature #1?
- MrMagoot
- Posts: 5
- Joined: Fri 04 Mar 2016 3:23 pm
- Weather Station: Oregon WMR88
- Operating System: Windows 10 Pro
- Location: Oaxen, island in Stockholm archipelago
- Contact:
Re: Strange problem ?!
Good morning
Unfortunately, there is a hardware error on my WMR 88 so I will shut everything down for the time being.
Thank you for all the help and support I received from you
Regard Micke
Unfortunately, there is a hardware error on my WMR 88 so I will shut everything down for the time being.
Thank you for all the help and support I received from you
Regard Micke
Oregon Scientific WMR88
http://amrdata.se/weather
http://amrdata.se/weather