Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.11.2 (build 3131) - 16 May 2021 (please see announcement regarding releases since 3.5.0)
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

Davis anemometer replacement

Discussion specific to Davis weather stations
Post Reply
Posts: 187
Joined: Sat 27 Aug 2016 12:11 am
Weather Station: Davis vantage pro 2
Operating System: Debian
Location: Youngstown, Ohio

Davis anemometer replacement

Post by jlmr731 »

Not sure if this has been discussed about replacement of the wind bearing Cartridge for Davis VP.
Mine stop spinning kinda been doing it for a while tried cleaning it but only last for a while, so I got a new one off amazon for $20 US and was very easy to install. Set screw for the cups and 1 phillips screw that held it in. Dont know if this is an updated part from Davis as it seem to be built better to protect the bearings from the weather.

here is the new one

And this is the old one

https://www.amazon.com/gp/product/B07MD ... UTF8&psc=1

Posts: 2950
Joined: Wed 06 May 2009 6:29 pm
Weather Station: Davis VP2 with Daytime FARS
Operating System: Windows XP SP3
Location: Cheadle Hulme, Cheshire, England

Re: Davis anemometer replacement

Post by RayProudfoot »

I had to replace the cartridge in mine recently and the new cartridge is a different design to the older one. Probably a design flaw corrected I would imagine.

I bought mine from a Davis-approved company here in England. Never bothered looking on Amazon.
Ray, Cheshire.


Post Reply