Hello everyone,
I am today the proud owner of my Vantage Pro 2 weather station (its a pre 2015 model but is brand new in the box)
Currently running a Vantage Vue with the last version of Cumulus MX on my Win10 machine and with the serial weatherlink data logger
My question is what exactly i will need to change to do the swap? Will i conserve all my archive data?
Another question is do i need to update the firmware on the console as it looks it has a very old one saying 2005 EU..And how i can do that?
Many Thanks and appreciate your help chaps
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Update to VP2
- raul_sbd
- Posts: 94
- Joined: Wed 16 Jan 2013 7:58 am
- Weather Station: Davis Vantage Pro2
- Operating System: Windows 10
- Location: Glossop
- Contact:
Update to VP2
You do not have the required permissions to view the files attached to this post.
- ConligWX
- Posts: 1573
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: Update to VP2
BTW. Before going live, update the Tipping Bucket to a Tipping Spoon, and also newer Aero Cone.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •
- raul_sbd
- Posts: 94
- Joined: Wed 16 Jan 2013 7:58 am
- Weather Station: Davis Vantage Pro2
- Operating System: Windows 10
- Location: Glossop
- Contact:
Re: Update to VP2
Yep that’s on my list of upgrades.. at the moment were is going installed has bit of obstruction of trees but when I move houses should b fine
Any changes I should do to my current set up coming from the Davis Vue ?
Any changes I should do to my current set up coming from the Davis Vue ?
- ConligWX
- Posts: 1573
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: Update to VP2
I don't think there is. Can't remember I done anything different when I upgraded to a vPro2 from the Vue.
Perhaps Mark could comment.
Perhaps Mark could comment.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •
- mcrossley
- Posts: 12694
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Update to VP2
Nothing to do for the upgrade - other than making sure your logger is configured for the required interval, then changing the station type in Cumulus.
- raul_sbd
- Posts: 94
- Joined: Wed 16 Jan 2013 7:58 am
- Weather Station: Davis Vantage Pro2
- Operating System: Windows 10
- Location: Glossop
- Contact:
Re: Update to VP2
Many Thanks guys I will update you on Saturday once it goes live fingers crossed all will b good !
- raul_sbd
- Posts: 94
- Joined: Wed 16 Jan 2013 7:58 am
- Weather Station: Davis Vantage Pro2
- Operating System: Windows 10
- Location: Glossop
- Contact:
Re: Update to VP2
Hello guys!!
Finally I have upgraded my Vue to a Vantage Pro 2.
All is good and I’m really happy with the new station!
Only thing I have noticed is in my steel gauges for temp, dew point and humidity the graphs are not showing.. I get what it’s in the image attached, all the rest of gauges seems ok and generating a graph.. any idea what could be?
You can see the error then you Hoover on the gauges page http://raulsbd.co.uk/gauges.htm
Many thanks in advance
Finally I have upgraded my Vue to a Vantage Pro 2.
All is good and I’m really happy with the new station!
Only thing I have noticed is in my steel gauges for temp, dew point and humidity the graphs are not showing.. I get what it’s in the image attached, all the rest of gauges seems ok and generating a graph.. any idea what could be?
You can see the error then you Hoover on the gauges page http://raulsbd.co.uk/gauges.htm
Many thanks in advance
You do not have the required permissions to view the files attached to this post.