Hi All
I have Windows 10 and am running the latest Cumulus MX with a Aercus WS 3083 station, when I start Cumulus it reads the station and then stops, it will only read the station again if i restart cumulus or at the rollover which i have set to midnight.
The station works fine its just Cumulus wont read it after its started, the station is set to 1 min intervals and so is Cumulus.
Any help appreciated.
Thanks
Marc
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Cumulus MX and Aercus WS 3083 Issue
Moderator: mcrossley
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Cumulus MX and Aercus WS 3083 Issue
Please run Cumulus with the "-debug" command line parameter, and then zip up the MXdiags folder and post it. Thanks.
-
- Posts: 4
- Joined: Fri 22 May 2020 8:30 am
- Weather Station: Aercus WS 3083
- Operating System: Windows 10
Re: Cumulus MX and Aercus WS 3083 Issue
Not sure exactly how to do that although i have found this latest file in the MXDiags folder.... does this help?
Many thanks
Many thanks
You do not have the required permissions to view the files attached to this post.
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Cumulus MX and Aercus WS 3083 Issue
Not much It shows MX reading the logger data, then nothing.
You need to start Cumulus using the command...
You need to start Cumulus using the command...
Code: Select all
CumulusMX.exe -debug
-
- Posts: 4
- Joined: Fri 22 May 2020 8:30 am
- Weather Station: Aercus WS 3083
- Operating System: Windows 10
Re: Cumulus MX and Aercus WS 3083 Issue
think i managed it....
let me know if it helps
let me know if it helps
You do not have the required permissions to view the files attached to this post.
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Cumulus MX and Aercus WS 3083 Issue
No debug
Code: Select all
2020-05-22 11:13:45.937 Command line: "C:\CumulusMX\CumulusMX.exe"
..
2020-05-22 11:13:46.022 Debug logging is disabled
2020-05-22 11:13:46.022 Data logging is disabled
-
- Posts: 4
- Joined: Fri 22 May 2020 8:30 am
- Weather Station: Aercus WS 3083
- Operating System: Windows 10
Re: Cumulus MX and Aercus WS 3083 Issue
I have no idea what happened but it now appears to be working completely fine.... no idea why.
Many thanks for the help Mark will shout if it plays up further.
Thanks
Marc
Many thanks for the help Mark will shout if it plays up further.
Thanks
Marc