Have used Cumulus with Oregon Scientific WMR-200 for about five years. It have worked 100% without any problems. But since a couple of weeks Cumulus no longer reports min temp from my the outdoor sensor. Note that the data is available on the WMR-200 but does not appear in Cumulus.
This is what I have done to fix it:
* Changed battery in the outdoor sensor. With reset.
* Restarted the WMR a couple of times.
* Uninstalled and reinstalled Cumulus.
Any ideas here?
Mant thanks in advance.
Regards,
//Dr
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Min Temp no longer logged
-
- Posts: 7
- Joined: Sun 21 Sep 2014 6:51 pm
- Weather Station: Oregon Scientific WMR200
- Operating System: Windows 10
- Location: Sweden
- Contact:
- beteljuice
- Posts: 3292
- Joined: Tue 09 Dec 2008 1:37 pm
- Weather Station: None !
- Operating System: W10 - Threadripper 16core, etc
- Location: Dudley, West Midlands, UK
Re: Min Temp no longer logged
All your lows seem to be in error !
... but 'This Month' looks OK
... but 'This Month' looks OK
......................Imagine, what you will KNOW tomorrow !
- mcrossley
- Posts: 12767
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Min Temp no longer logged
Not a lot we can do about Cumulus 1, but if you switch on debug logging and post a log file it may give a clue...
-
- Posts: 7
- Joined: Sun 21 Sep 2014 6:51 pm
- Weather Station: Oregon Scientific WMR200
- Operating System: Windows 10
- Location: Sweden
- Contact:
Re: Min Temp no longer logged
Thanks mcrossley I will do that and revert.
//Dr
-
- Posts: 7
- Joined: Sun 21 Sep 2014 6:51 pm
- Weather Station: Oregon Scientific WMR200
- Operating System: Windows 10
- Location: Sweden
- Contact:
Re: Min Temp no longer logged
Allright, I enclose a logfile
You do not have the required permissions to view the files attached to this post.
- mcrossley
- Posts: 12767
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Min Temp no longer logged
Thanks, the log appears to show everything working normally. I not quite sure though how Cumulus can be receiving and displaying the temperatures OK, recording highs and not recording lows!
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Min Temp no longer logged
You say Min temp is no longer logged. Mark says your debug log is normal.
Beteljuice says its is wrong all over your web site. When I look at your web site http://johnssonforsberg.net/weather/thisyear.htm I see what look like reasonable minimum temperatures for Sweden. Has the problem gone away?
If the problem has gone away, then the most likely cause is described at https://cumuluswiki.org/a/FAQ#End_of_Da ... r_Failures
If you disagree with me, and believe it is still not working, where is it that it goes wrong?
Let me take you through step by step.
Temperature is being read from your station to get the maximum.
The first place we see that temperature is in the monthly log, you can view (but not edit) this in Cumulus 1. Looking at a whole day's worth of lines, can you find the high and low you expect?
Is "today.ini" showing right high and low? If yes, then Cumulus 1 is correctly calculating the low. If no, then what is it reporting?
today.ini values are used for appending to "dayfile.txt". Is dayfile.txt showing right high and low?
In cumulus 1, there are lots of view screens, do they show right high and low?
If all these places show the correct figure and it is only your web site that is not showing correct figures, then I am puzzled, you appear to be using the standard web pages and not to have edited them, so I can't see any way for the preceding steps to be right, but this one wrong. The fault other people get is that they edit web templates and make a tiny mistake with a web tag or with HTML syntax.
Beteljuice says its is wrong all over your web site. When I look at your web site http://johnssonforsberg.net/weather/thisyear.htm I see what look like reasonable minimum temperatures for Sweden. Has the problem gone away?
If the problem has gone away, then the most likely cause is described at https://cumuluswiki.org/a/FAQ#End_of_Da ... r_Failures
If you disagree with me, and believe it is still not working, where is it that it goes wrong?
Let me take you through step by step.
Temperature is being read from your station to get the maximum.
The first place we see that temperature is in the monthly log, you can view (but not edit) this in Cumulus 1. Looking at a whole day's worth of lines, can you find the high and low you expect?
Is "today.ini" showing right high and low? If yes, then Cumulus 1 is correctly calculating the low. If no, then what is it reporting?
today.ini values are used for appending to "dayfile.txt". Is dayfile.txt showing right high and low?
In cumulus 1, there are lots of view screens, do they show right high and low?
If all these places show the correct figure and it is only your web site that is not showing correct figures, then I am puzzled, you appear to be using the standard web pages and not to have edited them, so I can't see any way for the preceding steps to be right, but this one wrong. The fault other people get is that they edit web templates and make a tiny mistake with a web tag or with HTML syntax.
- beteljuice
- Posts: 3292
- Joined: Tue 09 Dec 2008 1:37 pm
- Weather Station: None !
- Operating System: W10 - Threadripper 16core, etc
- Location: Dudley, West Midlands, UK
Re: Min Temp no longer logged
It seems to be behaving at the moment ....
......................Imagine, what you will KNOW tomorrow !