I've tried (just about) every permutation to try and get the general data/units on the main page to match the graph units. The graphed data looks fine however, the axis will show incorrect units ie,main page shows daily rainfall of 15.6mm (0.61 inches) then the graph axis shows 0.61 as the culmulative total but instead of inches it shows mm. I'm getting the same problem wind and barometer readings.
I'm guessing my config settings don't match WU and have tried so many settings my head is getting foggy.
Any pointers would be much appreciated
OK, I may have answered my own question by reading the readme file, do the graphs no longer work (properly) or do I have an outdated installation?
Davis Vantage Vue/Cumulus MX 3.0.2 b3052
http://www.mullweather.co.uk
http://www.mullweather.co.uk/pws
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Unit configuration problem
Moderators: saratogaWX, weatherist34
- saratogaWX
- Posts: 1211
- Joined: Wed 06 May 2009 5:02 am
- Weather Station: Davis Vantage Pro Plus
- Operating System: Windows 10 Professional
- Location: Saratoga, CA, USA
- Contact:
Re: Unit configuration problem
I just tried to replicate your issue with my local copy of the CU-HWS distribution and was unable to see the same issue.
As I switched units using the menu, the graphs would follow with conversions.
Your settings1.php has which are correct.
If you installed using git, I suggest you do a git pull to get the latest updates .. last update was Jun 10, 2019 which changed chartswu/conversion.php and may address your issues with the graphs.
As I switched units using the menu, the graphs would follow with conversions.
Your settings1.php has
Code: Select all
$worldloc = "uk";
$usa = false;
$uk = true;
$scandinavia = false;
$restoftheworld = false;
If you installed using git, I suggest you do a git pull to get the latest updates .. last update was Jun 10, 2019 which changed chartswu/conversion.php and may address your issues with the graphs.
-
- Posts: 6
- Joined: Sun 15 Sep 2019 9:36 pm
- Weather Station: Davis Vantage Vue
- Operating System: Raspberry Pi 3(B)
Re: Unit configuration problem
Thanks for a swift reply. Yes, I did get my copy from github though not sure how to 'pull' so guess I need to do some reading
I did replace my copy of conversion.php with your edited version (https://github.com/ktrue/CU-HWS/blob/ma ... ersion.php) but no change however, I got no warnings without a conversion.php which I expected after clearing my cache? It's been a long time since I played with code so a little rusty.
I did replace my copy of conversion.php with your edited version (https://github.com/ktrue/CU-HWS/blob/ma ... ersion.php) but no change however, I got no warnings without a conversion.php which I expected after clearing my cache? It's been a long time since I played with code so a little rusty.
-
- Posts: 6
- Joined: Sun 15 Sep 2019 9:36 pm
- Weather Station: Davis Vantage Vue
- Operating System: Raspberry Pi 3(B)
Re: Unit configuration problem
I've made a little progress using Opera but seem to have totally broken the graphs in Firefox lol. Am still thinking its a configuration issue so please don't waste any of your time looking into this (yet).
Cheers.
Cheers.