Hi All,
Not sure if this is doable over the web, but hopefully someone can shed some light. Unfortunately my father passed away suddenly at the start of March - he was a member here and had a weather station (Davis Vantage Pro 2) that updated a website. A few weeks later, the website stopped updating. My mum's just realised and asked me if I could work out what's going on. I've got so far, but reached a dead end and wondered if anyone on here could give a few pointers.
The set up:
The Vantage Pro is updating the reciever (display shows current weather etc). This is then connected to a usb hub which in turn goes to his Raspberry Pi. There's an SD card in the Pi itself, which is labelled settings. Also connected to the hub is an external hard drive. This drive contains all the files & folders for Culumus MX - the last date any of the logs have been updated with matches the last update shown on the website. I can't find any files or folders relating to Culumus anywhere else. No one has used the Pi since before Dad died until I logged onto it tonight - I had to use Admin and reset his password as we didn't know it.
I can't find anything that shows that Culumus MX is actually running on the Pi (although I've not used one before). Is there a command that I can use to check this? Or can I just 'start' Cumulus MX again? Obviously we've tried restarting the Pi, but that's had no effect.
Any help would be gratefully recieved. Dad really enjoyed his weather station and it seems a shame to just stop it when he worked so hard to get it going! He was always really grateful for the help he got from the people on here too - so in family tradition I thought I'd ask too!
Cheers
Dan
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Help to understand my Dad's system
Moderator: mcrossley
-
- Posts: 2
- Joined: Mon 07 May 2018 12:39 am
- Weather Station: Davis Vantage Pro 2
- Operating System: Raspberry Pi
-
- Posts: 2
- Joined: Mon 07 May 2018 12:39 am
- Weather Station: Davis Vantage Pro 2
- Operating System: Raspberry Pi
Re: Help to understand my Dad's system
Have just found a folder of notes that Dad wrote about the set-up! All very helpful and seem to have done the trick... he'd be very pleased!
- mcrossley
- Posts: 12767
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Help to understand my Dad's system
Sorry to hear about your Dad, but I'm glad you got it going.
I suspect he was using something like "screen" to launch Cumulus (like me!), this requires user interaction to restart Cumulus if the rPi is rebooted. You may want to investigate this script [https://cumulus.hosiene.co.uk/viewtopic.php?f=27&t=13767] which will restart Cumulus automatically on reboot.
Do you have a link to the website?
I suspect he was using something like "screen" to launch Cumulus (like me!), this requires user interaction to restart Cumulus if the rPi is rebooted. You may want to investigate this script [https://cumulus.hosiene.co.uk/viewtopic.php?f=27&t=13767] which will restart Cumulus automatically on reboot.
Do you have a link to the website?
-
- Posts: 214
- Joined: Tue 24 Nov 2015 11:30 pm
- Weather Station: Fine Offset & Davis Vantage Vue
- Operating System: Windows 10; Raspbian Buster
- Location: Switzerland
Re: Help to understand my Dad's system
I'm unsure why the 'screen' script method has become so popular. It's much easier to just use 'cron' and run Cumulus as a background task, autostarting at every reboot.And I set my Pi to reboot in the early hours each day in case there's a problem when I'm away on holiday.mcrossley wrote:I suspect he was using something like "screen" to launch Cumulus (like me!), this requires user interaction to restart Cumulus if the rPi is rebooted.
See https://cumulus.hosiene.co.uk/viewtopic.p ... &start=396
- mcrossley
- Posts: 12767
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Help to understand my Dad's system
I now use cron and screen, screen just makes it easy for me to reattach/detach to Cumulus to check what is going on.