Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Decoding METARS
- saratogaWX
- Posts: 1170
- Joined: Wed 06 May 2009 5:02 am
- Weather Station: Davis Vantage Pro Plus
- Operating System: Windows 10 Professional
- Location: Saratoga, CA, USA
- Contact:
Re: Decoding METARS
Wow, thanks for the detailed report about the changes!
I'm interested in your PHP7 code if you're willing to share.
I will be updating the get-metar-conditions-inc.php script to accommodate the 2017 changes (and a couple of bug fixes that have emerged lately).
Thanks!
Best regards,
Ken
I'm interested in your PHP7 code if you're willing to share.
I will be updating the get-metar-conditions-inc.php script to accommodate the 2017 changes (and a couple of bug fixes that have emerged lately).
Thanks!
Best regards,
Ken
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Decoding METARS
Shared (September 2017 version) with Ken by PM. I have a new version, but the changes relate to coping better with just a few foreign METAR which use RMK group or push the boundaries a bit (e.g. a colour state of 'BLU+')!saratogaWX wrote:I'm interested in your PHP7 code if you're willing to share.
Although I cannot guarantee my script will always work, I have tested my script with around a thousand METAR, most are UK sourced, some are from North Sea rigs, some from European aerodromes nearby, and other examples have been taken from a wide selection of countries in all the continents. To test the standard international format a few of my test METAR have been made-up. Unlike many scripts found on-line, my script does attempt to cope with many malformed METARs I have encountered, and it does decode not just the mandatory key parts of a METAR report (that is all that the current version of Ken's script can handle) but also the more rarely used conditional elements. There is a Group within the METAR definition for general remarks. As the allowed content is set by each country and often is abbreviated plain text (not always in English) I can only decode a selection of the possible content there.
Any Canadians familiar with their METAR content can help me as I do not yet have ability to translate your two letter codes for cloud and general weather, (in RMK Group) nor understand your 'BBBB' system with RR?, CC?, AA? or P?? that appears before the Surface Wind Group.
The previous most comprehensive internationally-focussed METAR decoding option in a freely available source code was written (2002 to 2007) in JavaScript by Manuel Heras and is available at "http://www.heras-gilsanz.com/manuel/METAR-Decoder.html". North American use of Altimeter readings in "in Hg" instead of QNH in "hPa" and prevailing visibility in "statute miles" instead of "metres" was added to this script by Ricardo Fernández. This script is widely used on many commercial web sites (JavaScript is processed by a browser so your browser can therefore display it, and allow it to be downloaded) but that script does less than my script as it does not cope with malformed METAR entry, nor Colour State codes, and it excludes any RMK group decoding. Those unable to use PHP might want to use that script instead.
Last edited by sfws on Mon 23 Oct 2017 7:15 pm, edited 1 time in total.
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Decoding METARS
In trying to reply to PM I get
"Some users couldn’t be added as they have disabled private message receipt."
You can email me.
Paul
"Some users couldn’t be added as they have disabled private message receipt."
You can email me.
Paul
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
![Image](http://www.komokaweather.com/weather/current.php)
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Decoding METARS
Hi sfws;
I can share my spreadsheet if that could be helpful.
I presume you have looked at https://ec.gc.ca/manobs/default.asp?lan ... 3a380ded-1
If there is something specific in this that is not clear I would gladly get in touch with an EC Meteorologist who I communicate with on occasion (CANWARN) and see if he has the information or where to get it.
Regards,
Paul
I am not knowledgeable about METAR but a couple of years ago I started a spreadsheet by regularly copying in the local CYXU METAR (London, ON) and comparing my station's data to the METAR, especially pressure. At that time I also copied into my spreadsheet the METAR definitions that was linked at the CYXU site. I haven't updated this for about 18 months and now see that the METAR definitions are no longer linked at the CYXU station.Any Canadians familiar with their METAR content can help me as I do not yet have ability to translate your two letter codes for cloud and general weather, (in RMK Group) nor understand your 'BBBB' system with RR?, CC?, AA? or P?? that appears before the Surface Wind Group.
I can share my spreadsheet if that could be helpful.
I presume you have looked at https://ec.gc.ca/manobs/default.asp?lan ... 3a380ded-1
If there is something specific in this that is not clear I would gladly get in touch with an EC Meteorologist who I communicate with on occasion (CANWARN) and see if he has the information or where to get it.
Regards,
Paul
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
![Image](http://www.komokaweather.com/weather/current.php)
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Decoding METARS
PaulPaulMy wrote: I presume you have looked at https://ec.gc.ca/manobs/default.asp?lan ... 3a380ded-1
That is exactly what I was looking for, I had tried a search for 'METAR' on a different part of the EC site, but it gave me access to METAR reports, not the definition. I should have thought of adding 'publications' or something similar to my search.
Thank you very much. From a quick glance, that almost certainly contains everything I wanted. When I'm next able to spend time coding, that will allow me to really make my decoder the most comprehensive one available, accepting METAR from anywhere.
Since other people successfully send me (and reply to) PMs, and I have not changed any settings since I cannot account for the error you saw.
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Decoding METARS
Hi sfws, and glad that will be helpful, and look forward to your finished work. Let me know if I can be of any further help.
Enjoy,
Paul
Your PM was received but could not send a reply and that message came up. Tried several times and got the same message. Today I couldn't even find a PM button on your profile but does show up for other users. Here is what I get from my control panel when I enter your user name to add recipient.Since other people successfully send me (and reply to) PMs, and I have not changed any settings since I cannot account for the error you saw.
Enjoy,
Paul
You do not have the required permissions to view the files attached to this post.
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
![Image](http://www.komokaweather.com/weather/current.php)
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Decoding METARS
Maybe what others have been doing is just hitting 'send reply' button (i.e. using button when my PM is displayed), rather than attempting to create a new message, maybe I just clicked the wrong place in the user panel sometime or maybe when Steve migrated to a new bulletin board version a while ago now some setting defaults changed! Although I have been contributing quite a bit recently, there was a period when I was focussed on more active outdoor activities. Anyway, I have reset all my user panel settings, so that should cure any PM sending difficulties.PaulMy wrote:when I enter your user name to add recipient
I realise now that looking at other decoders or at places like Wipedia to see what codes exist, muddles me as the information there is often incomplete or out of date. That is why it is critical that I look at detailed reference books written by the appropriate office in each country. But each time I look at the script I am improving it and I remain confident that I will soon have the best possible script to parse METAR and decode almost everything that is not free text!PaulMy wrote: look forward to your finished work. Let me know if I can be of any further help.
I've just added Canada's "Variable Visibility" type to my decoder, I made a few errors (for me it is the end of a busy day) while typing in the extra code, but when I corrected my carelessness that new addition works on the METAR quoted as an example and gives an equivalent explanation. It will be a while before I work through all the extras as I have some more busy days coming, but I do feel cheered up!
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Decoding METARS
Success I think, PM sent.
Paul
Paul
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
![Image](http://www.komokaweather.com/weather/current.php)
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Decoding METARS
Some facts about my decoding suite of PHP scripts:
# - My scripts are now compatible with all PHP versions from 5.4.0 to 7.1.15
# - This project was essentially a challenge I set myself with the aim of learning much more about PHP (I am entirely self-taught)
#- Essentially, this was my major project for July to November 2017, PaulMy has been using the suite continuously since 7 November 2017, my suite was logging any initial failures to understand particular unanticipated METAR content for his choice of Canada and USA airports at
http://www.komokaweather.com/metar/encoded_metar.txt and more complicated difficulties were logged at http://www.komokaweather.com/metar/fail ... _metar.log.
# - Most updates since this posting was originally made have been improvements based on something in those logs. I now have many other activities to fit in, so any recent updates will have been tested less well than the original script in November 2017.
# - The lack of any similar live running by anyone elsewhere means I must rely on my own testing to refine the script for airports outside Canada/USA. I can test my decoder against METAR issued by around 220 different aerodromes around the world, but I do not have the time to do lots of testing and a key point about METAR is what is issued at the time of my testing may be totally different to what is issued one hour/day/week/month later! I have tested against a couple of thousand issues, but that represents a drop in the ocean compared to the number actually issued since I started in July 2017.
# - The aim of my project was to output British English explanations of everything contained in any METAR issued by any airport anywhere in the world. I have not been able to find any other decoder that does not specialise in a sub-set of METAR content. Indeed, the WMO states it is impossible to write a computer programme than can decode any more than the basic METAR and that probably accounts for why I have not found any other decoder as ambitous as mine.
# - I can guarantee that not everything that will ever be included in a METAR will be recognized by my decoder. However, I have probably gone further than is reasonable in covering a very wide range of possible METAR element combinations, including much misformed content.
# - It remains possible that unexpected content might confuse my suite and could cause a crash, but I do believe I have anticipated as much content as I can. Remember, the TAC format for METAR that my suite addresses is not precisely specified and in some places almost any text may be found.
# - I deliberately experiment with a wide variety of php functions to try them out and the suite may not be using the most efficient design
# - I have learnt a lot about METAR as issued in every country in the world, see PDF paper that I have produced in zip.
# - That paper also describes how ICAO and WMO are forcing abandonment of METAR in TAC format of traditional alphanumerical characters I mentioned in earlier post
# - My suite decodes METARs still using the Traditional Alphanumeric Characters format, not those in the newer digital format, and it is possible that the TAC format will be abandoned by 2020 rendering my suite obsolete!
# - The outputs are in some cases, long phrases, because they are clear or precise explanations, in no cases do I output just the numbers. The explanatory text is fixed, so a user can in their own web page strip off unwanted parts of the text if they are able to write program code.
# - As just one example, when reporting air presures I differentiate between sea level pressure (SLP) and pressure at other altitudes, rival decoders just quote a pressure reading and you cannot tell whether that is SLP or an altimeter reading at a different level. It is difficult to decide which terms are too technical, because some people know more than others, but I am not aiming at meteorologists nor those who want just numbers, but at those who want enough to understand what the report is saying!
# - The expectation is that the suite will be used by those wanting to augment (or make comparisions) outputs from their personal weather stations with information from nearby airports, and I expect that users will choose to display only a subset of the information available in the output array, but hopefully all you might want is available.
# - For USA I am decoding specifications in both Civil and Air Force handbooks as there are some differences, and although both books specify a sequence to be followed, in practice USA content I have found in the Remarks Group in live METAR has both inconsistent sequencing and a free format for much of the abbreviated codes; I don't rely on any particular sequencing, but the free format aspect means that USA Remarks decoding, like that in other countries, may sometimes fail, although fortunately this happens very rarely.
For testing my suite, I have developed and revised many web pages that call my decoder. I don't know what design you as a user want, nor which parts of my output array you want to have displayed, so I don't provide any display facility in the zip. Read the sources for the two web pages I produced for 'PaulMy ' at http://www.komokaweather.com/metar/meta ... ar_display and http://www.komokaweather.com/metar/meta ... isplay-alt. Remove the queryString (question mark onwards) to see the relevant page in action.
The PDF in the zip discusses all available outputs, but many will be seen on one or other of those web pages.
All the suite scripts, including those mentioned below as being available on Paul's site, and the two folders with images as used on his web pages, are available in the zip which includes the PDF paper that explains all the files in the zip and how to use them. If a particular file, or files, has/have been updated recently, the version on Paul's site and the latest version in the zip might have slight discrepancies.
The top level script of my decoder can be read at http://www.komokaweather.com/metar/meta ... ecodeMETAR.
The script at the next level down is read at http://www.komokaweather.com/metar/meta ... _sub_funct.
The optional script for decoding the Remarks Group is at http://www.komokaweather.com/metar/meta ... eMETAR_Rmk. It optionally calls further scripts for Canada and USA, although because these are not loaded at the start, sources can only be viewed once they are loaded, use either http://www.komokaweather.com/metar/deco ... AR_Can_Rmk or http://www.komokaweather.com/metar/deco ... AR_USA_Rmk.
Incidentally, to view PHP sources written by me, the queryString attribute can be 'sce', 'src', or 'viewSource' and although I vary between the three attributes in examples above, you can choose any one and use it in all places.
I've not been highlighting when I issue changes in this thread because only Paul is testing my suite in live running conditions, and there have been no extra downloads. If there is no more unanticipated content at his local airports, there will be no futher updates to my suite.
# - My scripts are now compatible with all PHP versions from 5.4.0 to 7.1.15
# - This project was essentially a challenge I set myself with the aim of learning much more about PHP (I am entirely self-taught)
#- Essentially, this was my major project for July to November 2017, PaulMy has been using the suite continuously since 7 November 2017, my suite was logging any initial failures to understand particular unanticipated METAR content for his choice of Canada and USA airports at
http://www.komokaweather.com/metar/encoded_metar.txt and more complicated difficulties were logged at http://www.komokaweather.com/metar/fail ... _metar.log.
# - Most updates since this posting was originally made have been improvements based on something in those logs. I now have many other activities to fit in, so any recent updates will have been tested less well than the original script in November 2017.
# - The lack of any similar live running by anyone elsewhere means I must rely on my own testing to refine the script for airports outside Canada/USA. I can test my decoder against METAR issued by around 220 different aerodromes around the world, but I do not have the time to do lots of testing and a key point about METAR is what is issued at the time of my testing may be totally different to what is issued one hour/day/week/month later! I have tested against a couple of thousand issues, but that represents a drop in the ocean compared to the number actually issued since I started in July 2017.
# - The aim of my project was to output British English explanations of everything contained in any METAR issued by any airport anywhere in the world. I have not been able to find any other decoder that does not specialise in a sub-set of METAR content. Indeed, the WMO states it is impossible to write a computer programme than can decode any more than the basic METAR and that probably accounts for why I have not found any other decoder as ambitous as mine.
# - I can guarantee that not everything that will ever be included in a METAR will be recognized by my decoder. However, I have probably gone further than is reasonable in covering a very wide range of possible METAR element combinations, including much misformed content.
# - It remains possible that unexpected content might confuse my suite and could cause a crash, but I do believe I have anticipated as much content as I can. Remember, the TAC format for METAR that my suite addresses is not precisely specified and in some places almost any text may be found.
# - I deliberately experiment with a wide variety of php functions to try them out and the suite may not be using the most efficient design
# - I have learnt a lot about METAR as issued in every country in the world, see PDF paper that I have produced in zip.
# - That paper also describes how ICAO and WMO are forcing abandonment of METAR in TAC format of traditional alphanumerical characters I mentioned in earlier post
# - My suite decodes METARs still using the Traditional Alphanumeric Characters format, not those in the newer digital format, and it is possible that the TAC format will be abandoned by 2020 rendering my suite obsolete!
# - The outputs are in some cases, long phrases, because they are clear or precise explanations, in no cases do I output just the numbers. The explanatory text is fixed, so a user can in their own web page strip off unwanted parts of the text if they are able to write program code.
# - As just one example, when reporting air presures I differentiate between sea level pressure (SLP) and pressure at other altitudes, rival decoders just quote a pressure reading and you cannot tell whether that is SLP or an altimeter reading at a different level. It is difficult to decide which terms are too technical, because some people know more than others, but I am not aiming at meteorologists nor those who want just numbers, but at those who want enough to understand what the report is saying!
# - The expectation is that the suite will be used by those wanting to augment (or make comparisions) outputs from their personal weather stations with information from nearby airports, and I expect that users will choose to display only a subset of the information available in the output array, but hopefully all you might want is available.
# - For USA I am decoding specifications in both Civil and Air Force handbooks as there are some differences, and although both books specify a sequence to be followed, in practice USA content I have found in the Remarks Group in live METAR has both inconsistent sequencing and a free format for much of the abbreviated codes; I don't rely on any particular sequencing, but the free format aspect means that USA Remarks decoding, like that in other countries, may sometimes fail, although fortunately this happens very rarely.
For testing my suite, I have developed and revised many web pages that call my decoder. I don't know what design you as a user want, nor which parts of my output array you want to have displayed, so I don't provide any display facility in the zip. Read the sources for the two web pages I produced for 'PaulMy ' at http://www.komokaweather.com/metar/meta ... ar_display and http://www.komokaweather.com/metar/meta ... isplay-alt. Remove the queryString (question mark onwards) to see the relevant page in action.
The PDF in the zip discusses all available outputs, but many will be seen on one or other of those web pages.
All the suite scripts, including those mentioned below as being available on Paul's site, and the two folders with images as used on his web pages, are available in the zip which includes the PDF paper that explains all the files in the zip and how to use them. If a particular file, or files, has/have been updated recently, the version on Paul's site and the latest version in the zip might have slight discrepancies.
The top level script of my decoder can be read at http://www.komokaweather.com/metar/meta ... ecodeMETAR.
The script at the next level down is read at http://www.komokaweather.com/metar/meta ... _sub_funct.
The optional script for decoding the Remarks Group is at http://www.komokaweather.com/metar/meta ... eMETAR_Rmk. It optionally calls further scripts for Canada and USA, although because these are not loaded at the start, sources can only be viewed once they are loaded, use either http://www.komokaweather.com/metar/deco ... AR_Can_Rmk or http://www.komokaweather.com/metar/deco ... AR_USA_Rmk.
Incidentally, to view PHP sources written by me, the queryString attribute can be 'sce', 'src', or 'viewSource' and although I vary between the three attributes in examples above, you can choose any one and use it in all places.
I've not been highlighting when I issue changes in this thread because only Paul is testing my suite in live running conditions, and there have been no extra downloads. If there is no more unanticipated content at his local airports, there will be no futher updates to my suite.
You do not have the required permissions to view the files attached to this post.
Last edited by sfws on Sun 18 Mar 2018 7:28 am, edited 44 times in total.
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Decoding METARS
I have been using this decoder for some time now and this has been providing feedback on our local Metar conditions to help in overcoming some of the differences/variations by local airport Metar reporting. Sfws has put a tremendous amount of time and effort on this decoder and I find it very interesting to compare our area Metars http://www.komokaweather.com/metar/metar_display.php
Use the Click to Show/Hide to see more Metars...
Enjoy,
Paul
Use the Click to Show/Hide to see more Metars...
Enjoy,
Paul
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
![Image](http://www.komokaweather.com/weather/current.php)
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Decoding METARS
For those following this metar decoder, sfws has updated the zip (16Feb2018) and this contains a PDF on the project. This helps to understand the complexity and the work and time involved with the decoder.
Enjoy,
Paul
Enjoy,
Paul
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
![Image](http://www.komokaweather.com/weather/current.php)
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Decoding METARS
I have chanced on https://www.aweathermoment.com/metars/ where a meteorologist displays information translated from raw METARS via a JSON file. You choose a local ICAO code that is of interest to you, select a past time period, hit Load and (by magic) graphs appear showing how the weather has varied at your chosen location. There is also an option of seeing the data in tables. I am very impressed, perhaps even a bit jealous, recalling the effort I once put (while house-bound by health issues last year) into trying to understand METARS and the way they varied as issued from all around the world. I focused on improving the accuracy of the decoding, maybe I should have thought more about the presentation of all those numbers I obtained.
Don't forget to click the cogwheel and choose the settings (units and what to display) that suits you. The scope for tailoring is extensive, this is comprehensive programming.
Given my observation earlier in this thread that the most commonly used METAR decoder mentioned in the forum does not differentiate between sea level pressure and airfield level pressure, I was intrigued to see this site claims it always reports SLP, but this year introduced an improvement so where altimeter pressure is also available it takes the altimeter setting into account (whatever that actually involves) to verify extremes.
Those of you interested in wind chill, might want to read the wind chill issues discussion linked from that METAR page.
Don't forget to click the cogwheel and choose the settings (units and what to display) that suits you. The scope for tailoring is extensive, this is comprehensive programming.
Given my observation earlier in this thread that the most commonly used METAR decoder mentioned in the forum does not differentiate between sea level pressure and airfield level pressure, I was intrigued to see this site claims it always reports SLP, but this year introduced an improvement so where altimeter pressure is also available it takes the altimeter setting into account (whatever that actually involves) to verify extremes.
Those of you interested in wind chill, might want to read the wind chill issues discussion linked from that METAR page.
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Decoding METARS
Thanks for posting and providing the link.
Paul
Paul
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
![Image](http://www.komokaweather.com/weather/current.php)
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
- beteljuice
- Posts: 3292
- Joined: Tue 09 Dec 2008 1:37 pm
- Weather Station: None !
- Operating System: W10 - Threadripper 16core, etc
- Location: Dudley, West Midlands, UK
Re: Decoding METARS
@sfws ... don't know if it is as comprehensive as yours ? - and the choice of Canadian wind chill may be confusing.
.. but certainly a good use of 'Highcharts' and it loads surpringly quickly !
.. but certainly a good use of 'Highcharts' and it loads surpringly quickly !
......................Imagine, what you will KNOW tomorrow !
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Decoding METARS
Thanks @beteljuice.beteljuice wrote:@sfws ... don't know if it is as comprehensive as yours ?
The page suggests it focuses on Canadian METAR and has tried to add USA. So not worldwide like mine. But @buffaloseven does not share his METAR parser, so I can't directly compare decoding.