Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Davis VantageVue Rain Tipping Spoon Calibration
-
- Posts: 63
- Joined: Sat 28 Jan 2012 4:03 pm
- Weather Station: Davis Vantage Vue
- Operating System: Debian 12 64bit for rpi
Davis VantageVue Rain Tipping Spoon Calibration
On the bottom of the rain gauge assembly there's an adjustment knob covered with some sort of flexible plastic. When I was first installing it, I thought it had to be tightened, so I twisted it around.
Now I think that may have been to calibrate the tipping spoon. So it would no longer be calibrated to whatever they had it set to at the factory.
Do you know if there is any way to either find the correct position of the knob to return it to the factory calibration state, or to recalibrate it myself?
Thanks.
Now I think that may have been to calibrate the tipping spoon. So it would no longer be calibrated to whatever they had it set to at the factory.
Do you know if there is any way to either find the correct position of the knob to return it to the factory calibration state, or to recalibrate it myself?
Thanks.
-
- Posts: 1700
- Joined: Mon 10 Aug 2009 10:16 pm
- Weather Station: No weather station
- Operating System: No operating system
- Location: World...
Re: Davis VantageVue Rain Tipping Spoon Calibration
Your best (and only reliable) solution is to contact Davis Instruments Technical Support directly: support@davisnet.com
- Gordon-Loomberah
- Posts: 230
- Joined: Mon 17 Aug 2009 7:51 am
- Weather Station: Davis VP2 + Solar and UV
- Operating System: Windows 10 home
- Location: Loomberah, Australia
- Contact:
Re: Davis VantageVue Rain Tipping Spoon Calibration
Surely it is just a matter of measuring the area of the top of the collector (pi * r^2) and multiplying that by say 10mm to obtain a volume, then slowly pour that volume of water in and see if you come up with 10mm. That should be 50 (* 0.2mm) tips... assuming the tips/mm is the same in the Vantage Vue as the VP2 that I have.
Screwing the adjustment screws down means the buckets have to fill a bit more before tippping, ie a given rate will appear to be slower if you screw them in. Unscrew them a little (top comes up) to reduce the bucket swing and increase the measurement rate.
Just count the tips and adjust as necessary- take the battery out/remove solar panel so no signal is being sent (wireless) or unplug for cable, or alternatively save a snapshot of Cumulus before doing the test, then when done delete the version with the testing results and start from your saved snapshot. Probably just saving the whole Cumulus directory on your desktop and using that would be simplest, to keep your quantities, times etc correct.
Screwing the adjustment screws down means the buckets have to fill a bit more before tippping, ie a given rate will appear to be slower if you screw them in. Unscrew them a little (top comes up) to reduce the bucket swing and increase the measurement rate.
Just count the tips and adjust as necessary- take the battery out/remove solar panel so no signal is being sent (wireless) or unplug for cable, or alternatively save a snapshot of Cumulus before doing the test, then when done delete the version with the testing results and start from your saved snapshot. Probably just saving the whole Cumulus directory on your desktop and using that would be simplest, to keep your quantities, times etc correct.
Loomberah Weather: http://gunagulla.com
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Davis VantageVue Rain Tipping Spoon Calibration
Note that anything that artificially changes the (annual) rain total in the console will also eventually affect Cumulus, whether you take a snapshot or not.Gordon-Loomberah wrote:alternatively save a snapshot of Cumulus before doing the test, then when done delete the version with the testing results and start from your saved snapshot. Probably just saving the whole Cumulus directory on your desktop and using that would be simplest, to keep your quantities, times etc correct.
Steve
-
- Posts: 63
- Joined: Sat 28 Jan 2012 4:03 pm
- Weather Station: Davis Vantage Vue
- Operating System: Debian 12 64bit for rpi
Re: Davis VantageVue Rain Tipping Spoon Calibration
Thanks -- I ended up contacting Davis support, and they're sending me a replacement tipping spoon.
As far as the data while you're doing maintenance on the station goes; would it work to stop Cumulus before you start, and then when you're finished clear the data from the console before starting Cumulus again? There would be a small data gap.
On the VantageVue you press WIND, 2nd, and hold CLEAR to clear the console data. Or does that cause other problems with monthly and season totals?
As far as the data while you're doing maintenance on the station goes; would it work to stop Cumulus before you start, and then when you're finished clear the data from the console before starting Cumulus again? There would be a small data gap.
On the VantageVue you press WIND, 2nd, and hold CLEAR to clear the console data. Or does that cause other problems with monthly and season totals?
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Davis VantageVue Rain Tipping Spoon Calibration
As long as the annual rain total wasn't affected, it would probably be OK. It would probably also be OK if the annual rain total reset to zero; it should cope with that.david3 wrote:As far as the data while you're doing maintenance on the station goes; would it work to stop Cumulus before you start, and then when you're finished clear the data from the console before starting Cumulus again? There would be a small data gap.
I think the VP2 has a maintenance mode where any readings are ignored by the console; does the Vue have that?
Steve
-
- Posts: 1700
- Joined: Mon 10 Aug 2009 10:16 pm
- Weather Station: No weather station
- Operating System: No operating system
- Location: World...
Re: Davis VantageVue Rain Tipping Spoon Calibration
The mode is called 'Setup Mode' and is available on both consoles:steve wrote:I think the VP2 has a maintenance mode where any readings are ignored by the console; does the Vue have that?
- Vantage Vue: Press and release 2ND and then press SETUP.
- Vantage Pro: Press DONE and the - key (down arrow) at the same time.
-
- Posts: 63
- Joined: Sat 28 Jan 2012 4:03 pm
- Weather Station: Davis Vantage Vue
- Operating System: Debian 12 64bit for rpi
Re: Davis VantageVue Rain Tipping Spoon Calibration
Thanks. I didn't realize that the setup mode stopped the data collection.gemini06720 wrote:The mode is called 'Setup Mode' and is available on both consoles:
- Vantage Vue: Press and release 2ND and then press SETUP.
- Vantage Pro: Press DONE and the - key (down arrow) at the same time.
-
- Posts: 1700
- Joined: Mon 10 Aug 2009 10:16 pm
- Weather Station: No weather station
- Operating System: No operating system
- Location: World...
Re: Davis VantageVue Rain Tipping Spoon Calibration
gemini06720 wrote:The mode is called 'Setup Mode' and is available on both consoles:
- Vantage Vue: Press and release 2ND and then press SETUP.
- Vantage Pro: Press DONE and the - key (down arrow) at the same time.
From the Davis Instruments Vantage Pro2 manual:david3 wrote:Thanks. I didn't realize that the setup mode stopped the data collection.
From the Davis Instruments Vantage Vue manual:...enter Setup Mode by pressing DONE and then the - key (down arrow). Entering Setup Mode makes sure the station is not writing any data to memory when power is removed and avoids data loss.
...enter Setup Mode by pressing and releasing 2ND and pressing SETUP. Entering Setup Mode makes sure the station is not writing any data to memory when power is removed.
-
- Posts: 63
- Joined: Sat 28 Jan 2012 4:03 pm
- Weather Station: Davis Vantage Vue
- Operating System: Debian 12 64bit for rpi
Re: Davis VantageVue Rain Tipping Spoon Calibration
I took the weather station down today and took another look at it.
I feel really stupid now. I removed the rubber cap from the "adjustment knob" I thought I'd turned, and it's not connected to anything that turns or does any adjusting. It's just a cover. The screw inside isn't something that would be easy to accidentally turn.
I also tried to put the console in "setup mode" while I did the maintenance. I left Cumulus running, too, and the realtime.txt file continued to be updated. I think despite that, the data wasn't changing, but I'm not sure, because after 5-10 minutes the console timed out of the setup mode and went back to normal (before I was finished).
I didn't have much data saved, yet, so I just cleared everything out, but I'll have to figure out something better for next time.
I feel really stupid now. I removed the rubber cap from the "adjustment knob" I thought I'd turned, and it's not connected to anything that turns or does any adjusting. It's just a cover. The screw inside isn't something that would be easy to accidentally turn.
I also tried to put the console in "setup mode" while I did the maintenance. I left Cumulus running, too, and the realtime.txt file continued to be updated. I think despite that, the data wasn't changing, but I'm not sure, because after 5-10 minutes the console timed out of the setup mode and went back to normal (before I was finished).
I didn't have much data saved, yet, so I just cleared everything out, but I'll have to figure out something better for next time.
-
- Posts: 5
- Joined: Tue 16 Jun 2015 7:44 am
- Weather Station: Vantage pro2 and Vantage VUE
- Operating System: Win 7 Ultimate
- Location: Cairns,Australia
Re: Davis VantageVue Rain Tipping Spoon Calibration
I keep getting exactly 20.8 mls with 295 grams of water in my Vantage Vue every time after ten trials.