Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

DavisWeatherlink Live subnet mask problem?

Discussion specific to Davis weather stations
Post Reply
Whizzwoz
Posts: 38
Joined: Sun 08 Oct 2017 9:30 pm
Weather Station: Davis VP2
Operating System: Raspbian
Location: Lancing,West Sussex U.K.

DavisWeatherlink Live subnet mask problem?

Post by Whizzwoz »

Hello I am just seeing if anyone else gets this with their weatherlink live unit.I cannot seem to change the subnet mask to 255.255.255.0 in advance settings when you setup network.All ways says 0.0.0.0. after setup when you look at the units health on my weatherlink account on the web.
I just want to know if other people are getting this.
I have a airlink aqi sensor and that is set to 255.255.255.0.

Thankyou for your help.
User avatar
mcrossley
Posts: 12689
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2/WLL
Operating System: Bullseye Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: DavisWeatherlink Live subnet mask problem?

Post by mcrossley »

I use DHCP and wl.com shows my mask as 0.0.0.0 as well.
User avatar
ConligWX
Posts: 1570
Joined: Mon 19 May 2014 10:45 pm
Weather Station: Davis vPro2+ w/DFARS + AirLink
Operating System: Ubuntu 22.04 LTS
Location: Bangor, NI
Contact:

Re: DavisWeatherlink Live subnet mask problem?

Post by ConligWX »

ditto, though my AirLink shows the correct Subnet mask.
Regards Simon

https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •

Image
Whizzwoz
Posts: 38
Joined: Sun 08 Oct 2017 9:30 pm
Weather Station: Davis VP2
Operating System: Raspbian
Location: Lancing,West Sussex U.K.

Re: DavisWeatherlink Live subnet mask problem?

Post by Whizzwoz »

Cheers for checking your units,Looks like this is normal!
Now all I got to do is setup a website Ive got the normal cumumlus site but would like to make it a bit more personal.I am disabled with a brain injury from being run over by a car.Tried learning html but cannot remember what I read!!Have got the site hosted on a rpi: lancingweather.net

Thanks everybody for your help! Warren.
User avatar
dazza1223
Posts: 860
Joined: Sun 25 Jan 2015 8:41 pm
Weather Station: Davis Vantage Pro 2 plus
Operating System: Raspberry pi 4 (4gb)
Location: Worthing
Contact:

Re: DavisWeatherlink Live subnet mask problem?

Post by dazza1223 »

hi im only up the road form you.... and if u want more sort off chart ect i have some old pre mad template made
Have fun and keep learning

dazza :D

https://www.davisworthing.co.uk

Image
Whizzwoz
Posts: 38
Joined: Sun 08 Oct 2017 9:30 pm
Weather Station: Davis VP2
Operating System: Raspbian
Location: Lancing,West Sussex U.K.

Re: DavisWeatherlink Live subnet mask problem?

Post by Whizzwoz »

Cheers Dazza for the offer sorry about the late reply,I just sorting out some more hardware which is the airlink aqi sensor just waiting for the outdoor mains cable and dribox for the socket then it can go outdoors.Just found out that any airlink indoors is setup automatic by davis to be private and not public.
Anyway I am in shielding at the moment and will send you my email address by Private message.

Once again thanks Warren.
User avatar
dazza1223
Posts: 860
Joined: Sun 25 Jan 2015 8:41 pm
Weather Station: Davis Vantage Pro 2 plus
Operating System: Raspberry pi 4 (4gb)
Location: Worthing
Contact:

Re: DavisWeatherlink Live subnet mask problem?

Post by dazza1223 »

ok mate yh send it over and let me know what u need i will try and help as the best i can
Have fun and keep learning

dazza :D

https://www.davisworthing.co.uk

Image
Post Reply