Hello All,
I have a new Vantage PRO 2 which I am setting up with a new instance of Cumulus MX and the USB DataLogger from Davis. I have created my WeatherLink Live account and generate the API2 keys. However, the generated DeviceID on the WeatherLink Device Info page is alphanumeric. When I enter this in the Cumulus "WLL device id in WeatherLink APIv2" field (under the Davis WeatherLink Live section) , I get a validation error saying the value is not numeric.
Where do I find the Device ID value for the APIv2?
Thank you,
Michael
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
WLL device id on WeatherLink APIv2 value?
-
- Posts: 10
- Joined: Tue 24 Jun 2014 10:41 pm
- Weather Station: Davis Vantage Pro 2
- Operating System: Windows 10 Pro
- Location: Ravenna
Re: WLL device id on WeatherLink APIv2 value?
Found a Wiki link for the Davis devices (https://cumuluswiki.org/a/WeatherLink_Live).
That page notes leaving the Device ID blank.
New question, the WeatherLink setup in Cumulus is only for pulling the data from the WeatherLink website (API) into Cumulus, correct? Cumulus does not push data it has read from the serial port/logger to WeatherLink. One must use the WeatherLink software to have upload that data, right?
Thanks,
Michael
That page notes leaving the Device ID blank.
New question, the WeatherLink setup in Cumulus is only for pulling the data from the WeatherLink website (API) into Cumulus, correct? Cumulus does not push data it has read from the serial port/logger to WeatherLink. One must use the WeatherLink software to have upload that data, right?
Thanks,
Michael
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: WLL device id on WeatherLink APIv2 value?
I think you are confusing different things here.
You say you have a VP2, that is not a WeatherLink Live (WLL) device.
With a VP2, Cumulus does nothing with weatherlink.com, it reads live and historic data from the VP2 logger. The settings you are talking about are for WLL devices.
A VP2 can have a weatherlink.com account, but you have to run the WeatherLink software to perform the uploads. A VP2 can only have one piece of software talking to it at once.
You say you have a VP2, that is not a WeatherLink Live (WLL) device.
With a VP2, Cumulus does nothing with weatherlink.com, it reads live and historic data from the VP2 logger. The settings you are talking about are for WLL devices.
A VP2 can have a weatherlink.com account, but you have to run the WeatherLink software to perform the uploads. A VP2 can only have one piece of software talking to it at once.
-
- Posts: 10
- Joined: Tue 24 Jun 2014 10:41 pm
- Weather Station: Davis Vantage Pro 2
- Operating System: Windows 10 Pro
- Location: Ravenna
Re: WLL device id on WeatherLink APIv2 value?
Thanks for the clarification Mark.