Hi All,
I need some information about the functionality of the VP2 datalogger with Cumulus.
When I download data on weatherlink, for every "pack" of data I have the maximum temperature, minimum, max gust, ecc like the screen below:
So, with weatherlink, if I shutdown the PC, I don't miss anithing also I set the datalogger at 30 mins.
With Cumulus MX on raspberry I see only the current data at :00 or :30 and I miss the maximum, minimum, ecc in the time between two records.
There is a solution for this? To keep low the power consumption I need to shutdown the raspberry every hour and it would be a shame to lose the full values.
This is our installation, on a mountain called "Punta del Venerocolo" at 3320 m altitude.
Thank you in advanced for reply!
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Information about VP2 Datalogger with Cumulus
-
- Posts: 3
- Joined: Mon 30 May 2016 5:53 pm
- Weather Station: PCE Fws-20 (WH1080)
- Operating System: Windows 10
- Location: Brescia, Italy
Information about VP2 Datalogger with Cumulus
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3
- Joined: Mon 30 May 2016 5:53 pm
- Weather Station: PCE Fws-20 (WH1080)
- Operating System: Windows 10
- Location: Brescia, Italy
Re: Information about VP2 Datalogger with Cumulus
I have set the datalogger interval to 10 minutes, now it seems to work for the max gust
- mcrossley
- Posts: 12694
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Information about VP2 Datalogger with Cumulus
Cumulus is coded to read the high wind speed from the log interval into its gust data. I'm not sure why it does not work with a 5 minute logger interval.
-
- Posts: 3
- Joined: Mon 30 May 2016 5:53 pm
- Weather Station: PCE Fws-20 (WH1080)
- Operating System: Windows 10
- Location: Brescia, Italy
Re: Information about VP2 Datalogger with Cumulus
The logger interval was set to 30 minutes... Maybe the hi gust data is only for the last 10 minutes