Cumulus Support

Hello everyone,

Apologies if this is been discussed before. I’m using build 1099 of 1.9.4 cumulus with my Davis Vue weather station.

I have WunderStation on my iPad. All the parameters shows ok but no the indoor temperature/humidity and the uv.. looking on the forum found out that I had to tick the box on cumulus internet settings. I have done but now 30 min later still showing indoor temp as -18c and no data available. Is there anything I’m missing? I am able to see my webcam on WunderStation successfully.

Any help will be much appreciated,

Kind Regards

Have you restarted Cumulus? Quite a few of the config changes require a restart to take effect.

Sure I have tried restarting cumulus after selecting indoor temp and uv but same result..

Anyone can throw any light at the issue with indoor temp on WunderStation?

Thanks

Does the diags file show the values being sent to wu?

Where I could find that file?

In the Diags folder there are logs files written to by Cumulus, check the latest one.

I have the graph showing Inside Temp included in the graphs on my website. I’ve added the widget on the WU app but it also shows -18C.

I suspect it’s another thing broken at WU. My station hasn’t been showing on the WUnderground map for four days now despite continuous uploads to them.

They’ve become a bit of a shambles to be honest.

water01 wrote: ↑Mon 14 Jan 2019 8:52 am In the Diags folder there are logs files written to by Cumulus, check the latest one.

Thanks David nice to hear from you I hope is all well on your Us adventure! I will check the dish’s folder on cumulus on my pc and let you know what it shows

mcrossley wrote: ↑Sat 05 Jan 2019 12:05 pm Does the diags file show the values being sent to wu?

Thanks Mark I will check those values.. and post the results here

I found the latest file on that folder and is called cumulus 009, I have opened the file with txt but is so many data on there.. what I should be looking for to check if data of inside temp it’s been sent to WU? As all the rest of variables appear to be fine on the wunderstation app even the webcam displays fine.

Many Thanks

the parameter in the upload url is "indoortempf"

It was so many parameters on that file when I opened on txt but non of them with the indoortempf parameter.. what I could do?

Also I wanted some advice on updating my cumulus 1.9.4 to cumulus mx is that any easy to do?

Many thanks

Anyone?

Also I wanted some advice on updating my cumulus 1.9.4 to cumulus mx is that any easy to do?

It would be better to post this in the Cumulus MX section of the forum.

Yes it is quite easy to do, but make sure you have first read the Wiki and Downloads pages.

Enjoy,
Paul