Hello
I have recently been getting some bizarre readings from my Davis Vantage Vue setup. The outside temperature and humidity readings were ridiculous: 1% humidity, Dew Point -42c and so on.
I bought a new ISS assuming the old one was at fault but on setting it up I’m still getting the same weird readings, the ISS is indoors at the moment and according to the readings there’s a windspeed of anywhere between 9 and 15 mph!, also 1% humidity.
Could it be the console that’s faulty? And have I wasted nearly £200?
Any help would be appreciated.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Replacement ISS, Still Getting Weird Readings
-
- Posts: 91
- Joined: Sat 21 May 2011 4:46 pm
- Weather Station: Davis Wireless Vantage Pro2
- Operating System: Windows 7
- Location: Albuquerque, NM, USA
Re: Replacement ISS, Still Getting Weird Readings
Could it be that you are receiving signals from a neighbor's unit? The thing to try to change the channel your ISS is transmitting on and check with you get something different receiving on that channel than on the one you're using.
I myself had a mysterious problem from this cause when I first brought up my unit, never suspecting how considerable the range is over which you can sometimes receive.
I myself had a mysterious problem from this cause when I first brought up my unit, never suspecting how considerable the range is over which you can sometimes receive.
My cumulus generated weather site is at http://pastoll.info/weather
- ConligWX
- Posts: 1573
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: Replacement ISS, Still Getting Weird Readings
What firmware are you running on your Console?
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •
-
- Posts: 10
- Joined: Mon 28 Sep 2015 10:05 pm
- Weather Station: Davis vantage vue
- Operating System: Windows 10 64 bit
- Location: Penzance
Re: Replacement ISS, Still Getting Weird Readings
Hello again
Thanks for your prompt replies.
I think I've found the problem. I have a weatherlink datalogger attached to the console, I've detached it and the readings are now OK. I've yet to reconnect the datalogger but I'm hoping the problem will not return!
Thanks for your prompt replies.
I think I've found the problem. I have a weatherlink datalogger attached to the console, I've detached it and the readings are now OK. I've yet to reconnect the datalogger but I'm hoping the problem will not return!
-
- Posts: 10
- Joined: Mon 28 Sep 2015 10:05 pm
- Weather Station: Davis vantage vue
- Operating System: Windows 10 64 bit
- Location: Penzance
Re: Replacement ISS, Still Getting Weird Readings
I have reconnected the datalogger and now the outside humidity is reading 3%. All other readings appear normal.
Can anyone give me any advice on fixing this please? It does seem to be a fault with the datalogger, I’ve no idea why, the console has been sitting undisturbed on a window ledge for two years without a problem up until now.
Can anyone give me any advice on fixing this please? It does seem to be a fault with the datalogger, I’ve no idea why, the console has been sitting undisturbed on a window ledge for two years without a problem up until now.