Cumulus Support

Posted: **Thu 28 Apr 2016 12:27 pm**

I have a Davis VantageVue running with Cumulus, and the logger interval is set to 10 minutes on both the VantageVue and in Cumulus.

Today my PC's power supply stopped working, so it was down for about 5 hours.

When I started Cumulus up again, I expected it would read the archive data from the logger and catch up, but when I looked at the graphs, it seemed to be missing data. Also the "Archive records read" count at the bottom of the screen was 0.

So I checked the "apr16log.txt" file, and sure enough there's a 5 hour gap from 10:30 to 15:00

Code: Select all

28/04/16,10:20,32.9,67,25.9,3.2,8.0,290,0.0,0.0,1010.54,1.3,25.1,39,0.0,32.9,41.9,0.0,0,0.00,0.00,39.3,972,0.0,298,0.0,0.0
28/04/16,15:10,33.2,63,25.2,3.2,12.9,2,0.0,0.0,1008.91,1.3,25.3,46,6.4,33.2,41.2,0.0,0,0.00,0.00,39.1,670,0.0,345,0.0,0.0

I checked the diags folder, and found where I think it should have been loading the archive data:

Code: Select all

4/28/2016 15:06:19.006 : Loading last N hour data from data logs: 4/28/2016 10:20:00 AM
4/28/2016 15:06:19.045 : Loaded 7 entries to last hour data list
4/28/2016 15:06:19.074 : Loaded 19 entries to last 3 hour data list
4/28/2016 15:06:19.103 : Loaded 145 entries to last 24 hour data list
4/28/2016 15:06:19.144 : Loaded 1009 entries to recent data list
4/28/2016 15:06:20.052 : VP2: Setting raintotal from current station value: 1.26999998092651
4/28/2016 15:06:20.052 : Current rain counter: 1.270
4/28/2016 15:06:20.052 : Start of day counter: 1.300
4/28/2016 15:06:20.052 : Rain today so far: 0.000
4/28/2016 15:06:20.052 : Rain multiplier = 1.000
4/28/2016 15:06:20.075 : Writing today.ini, LastUpdateTime = 4/28/2016 10:20:00 AM raindaystart = 1.29999995231628 rain counter = 1.26999998092651
4/28/2016 15:06:20.076 : VP2: End of history download

That looks like it read the data, but not sure what happened. I also tried a test where I shut down Cumulus just before the 10 minute mark and started it back up just after. No archive records read and a missing data record in "apr16log.txt" file.

Also, I found other areas in the log file where I shut Cumulus down and restarted it, where there seems to be more information in the log when it's reading the logger that was missing earlier.

Code: Select all

4/28/2016 16:34:08.778 : Loading last N hour data from data logs: 4/28/2016 4:30:00 PM
4/28/2016 16:34:08.809 : Loaded 7 entries to last hour data list
4/28/2016 16:34:08.840 : Loaded 9 entries to last 3 hour data list
4/28/2016 16:34:08.871 : Loaded 117 entries to last 24 hour data list
4/28/2016 16:34:08.914 : Loaded 981 entries to recent data list
4/28/2016 16:34:08.914 : Last update time = 16:30
4/28/2016 16:34:08.914 : Log interval = 10
4/28/2016 16:34:08.914 : After rounding = 16:30
4/28/2016 16:34:08.926 : VP2: Downloading history from 4/28/2016 4:30:00 PM
4/28/2016 16:34:08.926 : y=2016 m=4 d=28 h=16 m=30
4/28/2016 16:34:12.656 : VP2: DownloadData_V = 0
4/28/2016 16:34:12.656 : VP2: GetNumberOfArchiveRecords_V = -1
4/28/2016 16:34:12.656 : VP2: No history records to process
4/28/2016 16:34:13.559 : VP2: Setting raintotal from current station value: 1.26999998092651
4/28/2016 16:34:13.559 : Current rain counter: 1.270
4/28/2016 16:34:13.559 : Start of day counter: 1.300
4/28/2016 16:34:13.559 : Rain today so far: 0.000
4/28/2016 16:34:13.560 : Rain multiplier = 1.000
4/28/2016 16:34:13.582 : Writing today.ini, LastUpdateTime = 4/28/2016 4:30:00 PM raindaystart = 1.29999995231628 rain counter = 1.26999998092651
4/28/2016 16:34:13.583 : VP2: End of history download

Any ideas?

I did upgrade from Windows 7 to Windows 10 last year, so not sure if that could have anything to do with it.

Posted: **Thu 28 Apr 2016 1:01 pm**

I can't tell what's happened from the snippets you've posted. Please zip up the diags folder and attach it.

Note that the Davis DLL never downloads the most recent logger entry, so if you shut down for 10 minutes (in your case), there will be no entries to download.

Posted: **Thu 28 Apr 2016 1:35 pm**

Here's the diags folder zipped.

Posted: **Thu 28 Apr 2016 3:17 pm**

When you started it up at 15:05, you used the station settings screen before it had got started properly - to change the com port, I think. It looks like this confused it into thinking that this was the first time it had started up, so it deliberately didn't attempt to download the logger data. I can understand why you had to do this, it's just unfortunate that it handled it like a new installation. For future reference, it would be safer to edit cumulus.ini to change the com port setting before you start Cumulus up.

You can 'rewind' and get it download the missing data, by copying the files from the backup folder it created at that time:

4/28/2016 15:05:56.774 : Creating backup folder C:\Cumulus\backup\20160428150556\

With Cumulus stopped, copy all of the files from that folder into the data folder, and then start it up.

Posted: **Thu 28 Apr 2016 3:33 pm**

Yes, I must have connected the cables in a different order after replacing the power supply so I had to change the com port setting.

Thanks for the info, and for looking at the logs. I'll try to remember to change the com port setting in the cumulus.ini file in the future.

I copied the backup data and restarted Cumulus, and success, Archive records read: 77.

Cumulus Support

Catching up with missing data with the VantageVue logger

Catching up with missing data with the VantageVue logger

Re: Catching up with missing data with the VantageVue logger

Re: Catching up with missing data with the VantageVue logger

Re: Catching up with missing data with the VantageVue logger

Re: Catching up with missing data with the VantageVue logger