Good morning, i write from Italy.
I have the problem with station wmr100.
After the installation of cumulus settings do not appear on the VP selection USB section, how can I do?
thank you
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Problem station wmr100
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Problem station wmr100
Please see the help - the 'VP Type' only applies to Davis stations. WMR100 stations are all USB, so you don't need tell Cumulus to use USB, there is no alternative.
Steve
-
- Posts: 3
- Joined: Sun 29 Jun 2014 1:29 pm
- Weather Station: os wmr100
- Operating System: windows 7 64 bit
- Location: italia
Re: Problem station wmr100
I understand, the fact remains that by connecting the station to the pc (windows 7 64bit), cumulus remains with all the values to 0
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Problem station wmr100
Please turn on the debug log and wait for a few minutes. Then zip up the diags folder and the debug.log file, and attach them to a reply.
Steve
-
- Posts: 3
- Joined: Sun 29 Jun 2014 1:29 pm
- Weather Station: os wmr100
- Operating System: windows 7 64 bit
- Location: italia
Re: Problem station wmr100
after many attempts I managed to get it to communicate with the PC and I can see all the data in real time on the PC, I have a problem, but unfortunately the original wind and temperature sensors have failed and I had to take a second anemometer and a thermo-hygrometer that I placed on ch.2, unfortunately if the anemometer works and I see the data, the hygrometer as soon as I connect the station to the PC stops receiving the signal, and I always value 0 of 0 outside temperature and the humidity, I do not know what to do
attention:
I found the problem, when I connect via usb weather station, receiving the external sensor decreases and so I have to bring the external probe, thanks a greeting
attention:
I found the problem, when I connect via usb weather station, receiving the external sensor decreases and so I have to bring the external probe, thanks a greeting