Page 6 of 6
Re: Installation
Posted: Wed 24 Jun 2020 7:17 am
by meteo19
Hi Hans
Ok it works I completely forgot to process it in the web folder.
On the other hand, it has a significant length involved (Logon server: \\ USER-PC
Hotfix: 289 Corrections installed.).
Thank you Hans good day.
Re: Installation
Posted: Wed 24 Jun 2020 8:18 am
by HansR
meteo19 wrote: ↑Wed 24 Jun 2020 7:17 am
On the other hand, it has a significant length involved (Logon server: \\ USER-PC Hotfix: 289 Corrections installed.).
That is because I originally handle the output in English. Almost impossible to handle all languages, I'll see what I can do, it should stop when the updatelist starts.
Bonne journée
Re: Installation
Posted: Sat 27 Jun 2020 8:38 am
by kocher
Greetings Hans
The new version (393) works perfectly.
I find the possibility of seeing the graph when clicking on a gauge very good; It should be noted that this occurs, when we already have a graph in the right panel:
http://kocher.es/cumulusMX/FWI/
The only graph that does not load is the compass rose (wind direction is loaded instead).
Congratulations on improving your application.
Javier
Re: Installation
Posted: Sat 27 Jun 2020 9:35 am
by HansR
Hi Javier,
Thanks for the feedback and the appreciation !
kocher wrote: ↑Sat 27 Jun 2020 8:38 am
It should be noted that this occurs, when we already have a graph in the right panel:
It also occurs when you have another report in the viewer. And note: if you have the wind speed graph on, than load e.g. YADR and then go Home, you will see the wind speed graph again and not the Temperature graphs: there is no complete reinitialisation anymore. There is a memory of the Cumulus Charts graph (apart from a page refresh, that is when you lose that).
kocher wrote: ↑Sat 27 Jun 2020 8:38 am
The only graph that does not load is the compass rose (wind direction is loaded instead).
Yes, that was a choice because I think the Dir graph is the current situation as is the gauge. The windRose graph is the history statistic for all the period. For the same reason, I did not load the Monthly rain or temperature graphs: they don't show the current situation but a statistic.
[Edit 28/6:] But I'll think about a windrose over summer
But let me know: if everybody wished to see something else, that won't be too difficult. Maybe even parametrisable .
Regards, Hans
Re: Installation
Posted: Sat 27 Jun 2020 11:50 am
by kocher
Thank you very much for your explanations Hans
Understood
Re: Installation
Posted: Mon 29 Jun 2020 12:52 am
by BeaumarisWX
HI ALL,
Unable to generate Website for Version 3.9.3 due to issue with "stationswithutils.xml" on line 72.
Currently : <Longi
- <Station>
<Name>Surrey Downs Weather</Name>
<Description>Surrey Downs, South Australia</Description>
<Website>http://wood-ward.com:8080/weather/pwsFWI.html</Website>
<Latitude>-34.8041666666667</Latitude>
<Longi38.629722222222</Longitude>
<Date>28-06-2020</Date>
</Station>
should be : <Longitude>
- <Station>
<Name>Surrey Downs Weather</Name>
<Description>Surrey Downs, South Australia</Description>
<Website>http://wood-ward.com:8080/weather/pwsFWI.html</Website>
<Latitude>-34.8041666666667</Latitude>
<Longitude>38.629722222222</Longitude>
<Date>28-06-2020</Date>
</Station>
Kind Regards,
Re: Installation
Posted: Mon 29 Jun 2020 1:03 am
by billy
Just tried to install V3.9.3 and seem to be getting the same error - please see attached log file.
2006290846cumulusutils.zip
Re: Installation
Posted: Mon 29 Jun 2020 4:25 am
by HansR
@billy: @BeaumarisWX: @all:
There seems to be an issue with the copy back mechanism of the maps datafile, creating a hole of some characters. Once in a while this makes the XML scan of the next user erroneous and causes a crash. Still have not found the cause. It's an FTP write back - just plain FTP. I welcome any idea about the cause. Maybe I should use another mechanism.
But it's corrected and working again
Cheers, Hans
Re: Installation
Posted: Mon 29 Jun 2020 4:54 am
by billy
Hans, yes it is working again
Many thanks.
Re: Installation
Posted: Mon 29 Jun 2020 7:09 am
by BeaumarisWX
Thanks Hans,
All good here now.
Though would like to change the System Info width from 700px to a tad wider if possible, see my site (it scrolls).
Also is there a way to omit "Registered Owner: etc." Just prefer not to have that on the System Info.
Kindest Regards,
Re: Installation
Posted: Mon 29 Jun 2020 2:18 pm
by HansR
@all:
OK! I am working to solve that annoying 'once in a while error' with the map by implementing an FTP lockfile mechanism. I may need some testers who are willing to synchronise runs of "
Cumulusutils mapson" so to enforce collisions. Think it over, I'll be asking within some days or so. This also will be valid for those who only use the map as a module. This issue is so annoying, because it requires manual intervention, that I postpone summer for a few days
@Tony: @all:
For the system info I abandoned selection on the title of the line (because that will be different in all languages) I am thinking of parametrising the inclusion/exclusion of the lines for windows sysinfo by line number. So the user could then specify which lines to show and which not. In the same go I would parametrise the width of the report as those who mostly use tablets probably are happy with the 700. Could you live with that?
For Linux I have no reason to do so as those are several commands with different outputs. But OK, if there are wishes - additions, removals - for the Linux sysinfo let me know.
And all in the same go I will most likely add some to the text dashboard to prevent breaks between the figures and the units when used on a phone or tablet. That would be just more neat.
Re: Installation
Posted: Mon 29 Jun 2020 7:54 pm
by BeaumarisWX
Hi Hans,
Thank you for the extra work, greatly appreciated, yes all the above sound great.
I can help with testing, though will be offsite all day Wednesday (tomorrow) 1st July.
Kindest Regards,
Re: Installation
Posted: Tue 30 Jun 2020 5:12 am
by HansR
Good, I'll make a new thread for the test, publishing the beta-release and the test spec for this. I think about a synchronised run at 11u00 and 12u00 UTC on friday 3/7 assuming synced computers and programmed start of exec. Hope some others will join, because creating intentional collisions is not all that easy. Of course I did preliminary testing but the proof of the pudding etc... So a live, crowded, FTP locking test would be nice. Wait for the new thread with the test exec.
Re: Installation
Posted: Tue 30 Jun 2020 9:20 am
by billy
I should be about and happy to participate