Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.16.1 (build 3183) - 06 May 2022

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are interested in supporting Cumulus then maybe you would like to contribute to the maintenance of the Wiki? This need not take hours of your time - just a half hour here and there can make a big difference, particularly if many people are doing this. Any contributions are very welcome, whether they involve new content or editing of existing content. It will be very helpful to current and future users of Cumulus software if the Wiki is kept well-maintained and current. If you are interested then please contact forum user saratogaWX and ask for a Wiki account.

Tipping Bucket Sensors - beware spiders

GW1000 WiFi gateway
Post Reply
User avatar
philpugh
Posts: 255
Joined: Tue 24 May 2011 8:34 am
Weather Station: See Signature
Operating System: Debian 10 (Buster)
Location: Antrobus, Cheshire, UK
Contact:

Tipping Bucket Sensors - beware spiders

Post by philpugh »

I know spiders are a perennial problem with many weather stations. This week I noticed that my WH65 sensor suite wasn't registering rain. I thought that high winds may have blocked the funnel with leaf debris - but it was clean. So I took it off the mount and brought it in for inspection. Twisting the funnel off revealed some dirt on the 'tipping bucket' which came off easily but it was obvious that the bucket wasn't returning to it's 'home' position. After rinsing out the rain gauge assembly it still didn't return to it's correct position. Then I noticed the very thin but very strong single spider thread attached to the bucket from below - it took a bright torch to spot it . After cleaning this away with a flexible plastic strip all was well. I was then putting the funnel back on and noticed the same material across the hole above the bucket. This was reducing the flow rate into the assembly dramatically. Easy to clear away but not easy to spot - especially without a bright light.

I will have to check my WH40 as well!
Phil Pugh
GW1000 + WH65/WH57/WH31; HP2551 + WH68/WH40A
http://goosegate.uk/
Post Reply