Hello
Minor issue
I am running MX B3133 and it is connected to my GW1000
MX says it is running normally - and as far as I can see it is (auto dicovery set and its the correct MAC adress) , but I keep geting the warning "failed to discover any GW1000 devices"
Is Cumulus still looking?
I am sure I read somewhere about an issue like this being fixed in a previous build, maybe I need to flush a cache somewhere?
Thanks for the software, its been very easy to set up and use
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Error - "Failed to discover any GW1000 devices"
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Error - "Failed to discover any GW1000 devices"
If it has the MAC address and it is connecting OK, then not too much to worry about.
Did you enter the IP address manually?
Auto-discovery usually fails because the router or a local firewall is blocking the required traffic.
If you still have issues then switch on debug logging (Program Options), restart Cumulus and then attach the latest MXdiags file here and I'll take a look. (don't forget to switch off debug logging afterwards)
Did you enter the IP address manually?
Auto-discovery usually fails because the router or a local firewall is blocking the required traffic.
If you still have issues then switch on debug logging (Program Options), restart Cumulus and then attach the latest MXdiags file here and I'll take a look. (don't forget to switch off debug logging afterwards)
-
- Posts: 40
- Joined: Sun 15 Nov 2020 8:57 am
- Weather Station: FineOffset Gw1002
- Operating System: Win10
Re: Error - "Failed to discover any GW1000 devices"
That's what I thoughtmcrossley wrote: ↑Fri 30 Jul 2021 3:46 pm If it has the MAC address and it is connecting OK, then not too much to worry about.
Did you enter the IP address manually?
Auto-discovery usually fails because the router or a local firewall is blocking the required traffic.
If you still have issues then switch on debug logging (Program Options), restart Cumulus and then attach the latest MXdiags file here and I'll take a look. (don't forget to switch off debug logging afterwards)
No, I didn't enter the Mac manually
No issues as far as data logging etc is concerned so I will leave well alone!
Thanks for the reply