Page 1 of 1
Two stations one Cumulus
Posted: Mon 07 Dec 2020 5:14 pm
by beskidus
Hello. I have WH 2080 stations connected with a raspberry pi usb cable and GW 1000 with a discharge detector from Ecowitt. I use raspberry pi and CumulusMX for WH 2080. GW 1000 uploads files to my server. Can these 2 stations be operated with one CumulusMX program?
Regards, Paweł
Re: Two stations one Cumulus
Posted: Mon 07 Dec 2020 8:07 pm
by mcrossley
No, you would need to run two copies of Cumulus, once connected to USB, the other to the GW.
Re: Two stations one Cumulus
Posted: Mon 07 Dec 2020 8:57 pm
by beskidus
On one raspberry? If so, how to configure in the browser?
Re: Two stations one Cumulus
Posted: Mon 07 Dec 2020 10:16 pm
by PaulMy
Hi Paweł,
I run more than one version of CumulusMX on Windows from Vue console/WiFiLogger, Weatherlink Live and GW1000.
You will need to start the second instance with a ...\CumulusMX.exe -port 899x where is is something different than the default 8998. Then in browser localhost:899x
Never used RPi so not sure on that but likely the same.
Enjoy,
Paul
Re: Two stations one Cumulus
Posted: Tue 08 Dec 2020 2:23 pm
by beskidus
Thanks for the answer. I'll try to work something ...
Re: Two stations one Cumulus
Posted: Tue 08 Dec 2020 3:18 pm
by mcrossley
You also need to make sure that you have the setting "Stop second instance" disabled under Settings | Station settings (on both your Cumulus instances).