Evening all,
I've seen my GW1003 register 99% humidity a handful of times but it's never gone above that. Should I set the Use 100% for 98% humidity option within CumulusMX?
Thanks.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Use 100% for 98% humidity?
- mcrossley
- Posts: 12766
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Use 100% for 98% humidity?
Only if you *really* want to see 100% values. Most sensors don't actually reach 100%, especially after they have aged a bit.
-
- Posts: 106
- Joined: Sun 08 Jan 2012 9:22 pm
- Weather Station: GW1003
- Operating System: Raspbian
- Location: Kirby Cross, Essex, UK
- Contact:
Re: Use 100% for 98% humidity?
Is there any benefit in seeing it at 100%? I have no issue if it's only going to report 99%, I just saw that option and wasn't sure if I should tick it or not.