I added a Weatherduino AQM a few days back & I'm seeing identical readings from both it & the real Davis which is outside.
http://weather.inverellit.com/index2.htm
Code: Select all
<tr class="tableseparator_airqual">
<td colspan="1">Air Quality Index</td>
<td>In</td>
<td colspan="2">Out</td>
<td>In</td>
<td>Out</td>
</tr>
<tr class="td_airqual_data">
<td>pm2.5 - Now</td>
<td><#AirLinkPm2p5In></td>
<td><#AirLinkPm2p5Out></td>
<td>pm10 - Now</td>
<td><#AirLinkPm10In></td>
<td><#AirLinkPm10Out></td>
</tr>
<tr class="td_airqual_data">
<td>pm2.5 - 1 Hour Average</td>
<td><#AirLinkPm2p5_1hrIn></td>
<td><#AirLinkPm2p5_1hrOut></td>
<td>pm10 - 1 Hour Average</td>
<td><#AirLinkPm10_1hrIn></td>
<td><#AirLinkPm10_1hrOut></td>
</tr>
<tr class="td_airqual_data">
<td>pm2.5 - 3 Hour Average</td>
<td><#AirLinkPm2p5_3hrIn></td>
<td><#AirLinkPm2p5_3hrOut></td>
<td>pm10 - 3 Hour Average</td>
<td><#AirLinkPm10_3hrIn></td>
<td><#AirLinkPm10_3hrOut></td>
</tr>
<tr class="td_airqual_data">
<td>pm2.5 - 24 Hour Average</td>
<td><#AirLinkPm2p5_24hrIn></td>
<td><#AirLinkPm2p5_24hrOut></td>
<td>pm10 - 24 Hour Average</td>
<td><#AirLinkPm10_24hrIn></td>
<td><#AirLinkPm10_24hrOut></td>
</tr>
The Same.
Now scrub all the above, it seems to go deeper.
My original Airlink is on 192.168.59.236. It's set as that under an outdoor device.
I added the Weatherduino in as indoor under 192.168.59.237, but that IP doesn't seem to stick.
The indoor one reverts to 12.168.59.236.
Just tried removing the API key etc (My AirLink is Standalone), but still no change.
If I save the indoor as @ 237 it reverts to 236 after a restart of MX.
Note also Auto discovery is off as both get their assigned IP's from my servers DHCP.
Dashboard shows the same matching data, but I believe the issue is that both are being assigned to the same IP.
Cheers
Phil.