Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
PWSweather upload doesn't work?
Moderator: mcrossley
-
- Posts: 65
- Joined: Sat 15 Mar 2014 4:50 pm
- Weather Station: Froggit GW1000
- Operating System: Windows-Linux
- Location: Italy
PWSweather upload doesn't work?
Hello,
I have enabled the upload to some weather services
Windy works I see data on the map and I found these lines in the log
2021-04-23 23:55:00.320 Windy Response: OK: SUCCESS (valid measurements count: 8, valid station info count: 0)
All lines are equal.
PWSweather doesn't work, these are the entries in the INI file (API removed)
[PWSweather]
ID=GW1000CT1
Password=My API key
Enabled=1
Interval=5
SendUV=0
SendSR=0
CatchUp=1
I copied the API from the apposite field.
In the log I didn't find any entries about the upload or error.
I am using the 6 April version Cumulus MX 3.10.5 b3122 on Armbian and Mono. But in Dashboard it still says that there is an update, there is a green indicator at the bottom of dashboard near Upgrade available.
Maybe because I don't have the wind sensor?
I have enabled the upload to some weather services
Windy works I see data on the map and I found these lines in the log
2021-04-23 23:55:00.320 Windy Response: OK: SUCCESS (valid measurements count: 8, valid station info count: 0)
All lines are equal.
PWSweather doesn't work, these are the entries in the INI file (API removed)
[PWSweather]
ID=GW1000CT1
Password=My API key
Enabled=1
Interval=5
SendUV=0
SendSR=0
CatchUp=1
I copied the API from the apposite field.
In the log I didn't find any entries about the upload or error.
I am using the 6 April version Cumulus MX 3.10.5 b3122 on Armbian and Mono. But in Dashboard it still says that there is an update, there is a green indicator at the bottom of dashboard near Upgrade available.
Maybe because I don't have the wind sensor?
- PaulMy
- Posts: 3849
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: PWSweather upload doesn't work?
When I try to access https://www.pwsweather.com/station/pws/GW1000CT1 I get
Enjoy,
Paul
Is that the correct Station ID, and can you login?GW1000CT1 could not be found.
We do not recognize this station ID or it hasn't sent us data yet.
Enjoy,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
-
- Posts: 65
- Joined: Sat 15 Mar 2014 4:50 pm
- Weather Station: Froggit GW1000
- Operating System: Windows-Linux
- Location: Italy
Re: PWSweather upload doesn't work?
Yes, the station is shown in my dashboard but is inactive since no data was uploaded.
- PaulMy
- Posts: 3849
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: PWSweather upload doesn't work?
I had been uploading to PWS Weather with Cumulus1, and now changed it to CumulusMX and it is updating fine and displays in the MXdiags:
You have ticked [x] Enabled, correct?
Enjoy,
Paul
Code: Select all
2021-04-24 13:00:00.190 http://www.pwsweather.com/pwsupdate/pwsupdate.php?ID=KOMOKA&PASSWORD=*********&dateutc=2021-04-24+17%3A00%3A00&winddir=360&windspeedmph=5.3&windgustmph=13.3&humidity=49&tempf=60.7&rainin=0.00&dailyrainin=0.00&baromin=29.899&dewptf=41.6&UV=3.6&solarradiation=800&softwaretype=Cumulus%20v3.11.0&action=updateraw
Enjoy,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
-
- Posts: 65
- Joined: Sat 15 Mar 2014 4:50 pm
- Weather Station: Froggit GW1000
- Operating System: Windows-Linux
- Location: Italy
Re: PWSweather upload doesn't work?
Yes it is enabled, you can see that in the config.ini section I posted above.
I didn't find any line in the log like yours, thank you for posting it.
I wander if the reason is because I don't have the wind sensor. Il live in a building and have building around so thi measure is meaningful.
I discovered that without it CumulusMX doesn't log all the measures, I had to force to do this in the setup, so maybe the reason can be this one. The other services works.
Maybe is a bug not discovered before because having a weather station without wind sensor is not common.
Edit: update!!!!
I find an error in log finally
2021-04-24 16:50:00.648 PWS Response: Unauthorized: <html lang="en">
<head>
<title>PWS Weather Station Update</title>
</head>
<body>
ERROR: Not a vailid Station ID/Password
</body>
</html>
So I made a mistake in setup, I made a copy paste but something went wrong!
Edit2: but what mistake?
In INI file the key is the same that one I have got from the site and the same for the ID, checked again.
Edit3: used the same http from the log in a browser and got the same error, maybe someting went wrong in the setup in PWS weather
Edit4: regenerated API, same error. I wrote to aerisweather support, I included the URL got from the log file.
I didn't find any line in the log like yours, thank you for posting it.
I wander if the reason is because I don't have the wind sensor. Il live in a building and have building around so thi measure is meaningful.
I discovered that without it CumulusMX doesn't log all the measures, I had to force to do this in the setup, so maybe the reason can be this one. The other services works.
Maybe is a bug not discovered before because having a weather station without wind sensor is not common.
Edit: update!!!!
I find an error in log finally
2021-04-24 16:50:00.648 PWS Response: Unauthorized: <html lang="en">
<head>
<title>PWS Weather Station Update</title>
</head>
<body>
ERROR: Not a vailid Station ID/Password
</body>
</html>
So I made a mistake in setup, I made a copy paste but something went wrong!
Edit2: but what mistake?
In INI file the key is the same that one I have got from the site and the same for the ID, checked again.
Edit3: used the same http from the log in a browser and got the same error, maybe someting went wrong in the setup in PWS weather
Edit4: regenerated API, same error. I wrote to aerisweather support, I included the URL got from the log file.
- PaulMy
- Posts: 3849
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: PWSweather upload doesn't work?
Hi,
Hopefully PWS will help you get this resolved.
Re your no wind sensor, since you are getting data from your sensors I presume in settings you have ticked -
[x] No sensor check
(!) Make Cumulus MX run even if you do not have the minimum sensors required (temp, press, wind)
Enjoy,
Paul
Hopefully PWS will help you get this resolved.
Re your no wind sensor, since you are getting data from your sensors I presume in settings you have ticked -
[x] No sensor check
(!) Make Cumulus MX run even if you do not have the minimum sensors required (temp, press, wind)
Enjoy,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
-
- Posts: 65
- Joined: Sat 15 Mar 2014 4:50 pm
- Weather Station: Froggit GW1000
- Operating System: Windows-Linux
- Location: Italy
Re: PWSweather upload doesn't work?
I discovered No sensor check after few months
- philpugh
- Posts: 386
- Joined: Tue 24 May 2011 8:34 am
- Weather Station: See Signature
- Operating System: Debian 11 (RPi4)
- Location: Antrobus, Cheshire, UK
- Contact:
Re: PWSweather upload doesn't work?
I am updating PWS from one of my stations and it doesn't appear to leave any information in the MXDiags file. I'm running MX b3122 under Debian 10 on a Pi Zero W.PaulMy wrote: ↑Sat 24 Apr 2021 5:15 pm I had been uploading to PWS Weather with Cumulus1, and now changed it to CumulusMX and it is updating fine and displays in the MXdiags:You have ticked [x] Enabled, correct?Code: Select all
2021-04-24 13:00:00.190 http://www.pwsweather.com/pwsupdate/pwsupdate.php?ID=KOMOKA&PASSWORD=*********&dateutc=2021-04-24+17%3A00%3A00&winddir=360&windspeedmph=5.3&windgustmph=13.3&humidity=49&tempf=60.7&rainin=0.00&dailyrainin=0.00&baromin=29.899&dewptf=41.6&UV=3.6&solarradiation=800&softwaretype=Cumulus%20v3.11.0&action=updateraw
Enjoy,
Paul
Do you need to enable FTP logging to see the info?
Phil Pugh
GW1000 + WH65/WH57/WH31; HP2551 + WS68/WH40A; GW2001 WittBoy
CumulusMX V4 / CUtils V7
Raspberry Pi 5 64bit
http://goosegate.uk/
GW1000 + WH65/WH57/WH31; HP2551 + WS68/WH40A; GW2001 WittBoy
CumulusMX V4 / CUtils V7
Raspberry Pi 5 64bit
http://goosegate.uk/
- PaulMy
- Posts: 3849
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: PWSweather upload doesn't work?
Hi Phil,
I do not have FTP Logging ticked, and the uploads are being logged in MXdiags at each interval. I am using latest versions on Windows 10.
Enjoy,
Paul
I do not have FTP Logging ticked, and the uploads are being logged in MXdiags at each interval. I am using latest versions on Windows 10.
Enjoy,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
- PaulMy
- Posts: 3849
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: PWSweather upload doesn't work?
Hi Phil,
Just to update...
I do have both Debug and Data logging turned on. You will only see any PWS logging if debug logging is switched on.
Enjoy,
Paul
Just to update...
I do have both Debug and Data logging turned on. You will only see any PWS logging if debug logging is switched on.
Enjoy,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
- philpugh
- Posts: 386
- Joined: Tue 24 May 2011 8:34 am
- Weather Station: See Signature
- Operating System: Debian 11 (RPi4)
- Location: Antrobus, Cheshire, UK
- Contact:
Re: PWSweather upload doesn't work?
Thanks Paul. I thought I was missing something!
Phil Pugh
GW1000 + WH65/WH57/WH31; HP2551 + WS68/WH40A; GW2001 WittBoy
CumulusMX V4 / CUtils V7
Raspberry Pi 5 64bit
http://goosegate.uk/
GW1000 + WH65/WH57/WH31; HP2551 + WS68/WH40A; GW2001 WittBoy
CumulusMX V4 / CUtils V7
Raspberry Pi 5 64bit
http://goosegate.uk/
-
- Posts: 65
- Joined: Sat 15 Mar 2014 4:50 pm
- Weather Station: Froggit GW1000
- Operating System: Windows-Linux
- Location: Italy
Re: PWSweather upload doesn't work?
The bug(s) was in PWSweather web interface.
The reason was that the Stadion ID had a space at the end. I deleted the station and created a new one.
Now I got this
2021-04-26 18:55:00.804 PWS Response: OK: <html lang="en">
<head>
<title>PWS Weather Station Update</title>
</head>
<body>
Data Logged and posted in METAR mirror.
</body>
</html>
So it is starting to work.
The other bugs are bad support for Firefox. Using Firefox when adding a station is quite impossible because every error you get a briefly error message, less on half second, and then you are again in the dashboard. Support was able to recreate this bug so they will work on it.
The reason was that the Stadion ID had a space at the end. I deleted the station and created a new one.
Now I got this
2021-04-26 18:55:00.804 PWS Response: OK: <html lang="en">
<head>
<title>PWS Weather Station Update</title>
</head>
<body>
Data Logged and posted in METAR mirror.
</body>
</html>
So it is starting to work.
The other bugs are bad support for Firefox. Using Firefox when adding a station is quite impossible because every error you get a briefly error message, less on half second, and then you are again in the dashboard. Support was able to recreate this bug so they will work on it.