Installed 3.7.0-b3089 and have noticed that on startup the Chart entries in cumulus.ini are fine set as per below:
However if I check both "Debug Logging and Data Logging" in "Station Settings > Options", it turns them inediately to 0: as per below.TempVisible=1
InTempVisible=1
HIVisible=1
DPVisible=1
WCVisible=1
AppTempVisible=1
FeelsLikeVisible=1
HumidexVisible=1
InHumVisible=1
OutHumVisible=1
I ran 3.7.0-beta3 3089without this issue, I have to shutdown and modify cumulus.ini and change them back to one, but it means now I cannot use "Debug Logging and Data Logging".TempVisible=0
InTempVisible=0
HIVisible=0
DPVisible=0
WCVisible=0
AppTempVisible=0
FeelsLikeVisible=0
HumidexVisible=0
InHumVisible=0
OutHumVisible=0
Oh and not related, but I had that same issue with usb disconnect again at 04:02 again this morning, have checked and absolutely nothing happening on my Nuc Haydes at that time, the only thing at that time is Davis Console Time Re sync at 04:00 ? Has me baffled, has never done it before. This is the second time in a week.
Kind Regards,