Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.8.0 (build 3090) - 12 August 2020 (please see important announcement regarding releases since 3.5.0)
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of the NOAA report and Snow Index drop-down menus to 2030)

Use this link to Download the Software (Cumulus MX / Cumulus 1 and other related items). Software

MX v 3.7.0-b3089 Possible Bug

From build 3044 the development baton passed to Mark Crossley. Mark has been responsible for all the Builds since. He has made the code available on GitHub. It is Mark's hope that others will join in this development, but at the very least he welcomes your ideas for future developments (see Cumulus MX Development suggestions).

Moderator: mcrossley

Post Reply
User avatar
BeaumarisWX
Posts: 237
Joined: Mon 09 Apr 2012 2:38 pm
Weather Station: Davis VP2 Plus - 24hr FARS
Operating System: Windows 10 Pro Hades Canyon
Location: Beaumaris Tasmania
Contact:

MX v 3.7.0-b3089 Possible Bug

Post by BeaumarisWX »

Hi Mark,
Installed 3.7.0-b3089 and have noticed that on startup the Chart entries in cumulus.ini are fine set as per below:
TempVisible=1
InTempVisible=1
HIVisible=1
DPVisible=1
WCVisible=1
AppTempVisible=1
FeelsLikeVisible=1
HumidexVisible=1
InHumVisible=1
OutHumVisible=1
However if I check both "Debug Logging and Data Logging" in "Station Settings > Options", it turns them inediately to 0: as per below.
TempVisible=0
InTempVisible=0
HIVisible=0
DPVisible=0
WCVisible=0
AppTempVisible=0
FeelsLikeVisible=0
HumidexVisible=0
InHumVisible=0
OutHumVisible=0
I ran 3.7.0-beta3 3089without this issue, I have to shutdown and modify cumulus.ini and change them back to one, but it means now I cannot use "Debug Logging and Data Logging".

Oh and not related, but I had that same issue with usb disconnect again at 04:02 again this morning, have checked and absolutely nothing happening on my Nuc Haydes at that time, the only thing at that time is Davis Console Time Re sync at 04:00 ? Has me baffled, has never done it before. This is the second time in a week.

Kind Regards,
Tony

BCJKiwi
Posts: 971
Joined: Mon 09 Jul 2012 8:40 pm
Weather Station: Davis VP2 Cabled with Solar
Operating System: Windows 10 Pro
Location: Auckland, New Zealand
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by BCJKiwi »

Also found on restart that some of the items in [Graph] were removed:-
InTempVisible
FeelsLikeVisible
HumidexVisible

It also looks like a previous version of webfiles\js\cumuluscharts.js got back into \webfiles as well as the switches are not being recognised but the beta3 cumuluscharts.js is respecting the [Graph] switches.

Cumulus.ini [Graph] switches, and beta3 cumuluscharts.js

So have re-instated the missing [Graph] switches in Cumulus.ini
This fixed the Charts page in the UI in terms of turning off those set to 0 but the tool tips are behaving strangely - nothing like they look in /webfiles/js/cumuluscharts.js

Have also re-instated beta3 cumuluscharts.js
Last edited by BCJKiwi on Wed 29 Jul 2020 6:11 am, edited 1 time in total.

griffo42
Posts: 60
Joined: Thu 10 Dec 2015 6:41 am
Weather Station: Davis Vantage Pro2
Operating System: Win 10
Location: Brisbane, Queensland, Australia
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by griffo42 »

I am having trouble too with this update. The best spread that was on my graphs was about 5 hrs and no choice with the 6 or 12hr options. Have reverted to b. 3088.

best wishes

Keith
Davis Vantage Pro2 Model #6152AU - CumulusMX - Win10 - Saratoga Scripts
https://www.kstwx.net/index.php
https://www.kstwx.net/mxtest/index.php
Image

User avatar
HansR
Posts: 1204
Joined: Sat 20 Oct 2012 6:53 am
Weather Station: Davis Vantage Pro 2+
Operating System: Raspbian GNU/Linux 10 (Buster)
Location: Wagenborgen (NL)
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by HansR »

As i have no problem at all i have 2 questions : 1) did you copy all files or just a selection? (Assume you did all but you never know) 2) did you clear the cache before starting the new interface?
(Did not have the time to replicate beaumarisWXs problem, will do that later and report back)
https://meteo-wagenborgen.nl / Cumulus 3.6.8 (build: 3084)
Davis Vantage Pro 2+ / Raspberry Pi 3 Model B Plus Rev 1.3
Raspbian Linux 10 (buster) / 4.19.118-v7+ armv7l
Mono JIT compiler version 6.8.0.123 (tarball Tue May 12 15:31:43 UTC 2020)

User avatar
ConligWX
Posts: 798
Joined: Mon 19 May 2014 10:45 pm
Weather Station: Davis vPro2 Plus +DFARS
Operating System: Ubuntu / Windows 10
Location: Bangor, NI
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by ConligWX »

BeaumarisWX wrote:
Wed 29 Jul 2020 1:08 am

However if I check both "Debug Logging and Data Logging" in "Station Settings > Options", it turns them inediately to 0: as per below.
TempVisible=0
InTempVisible=0
HIVisible=0
DPVisible=0
WCVisible=0
AppTempVisible=0
FeelsLikeVisible=0
HumidexVisible=0
InHumVisible=0
OutHumVisible=0
Kind Regards,
I cannot confirm this. just changed my data and debug logging to enabled. cumulus.ini updated but however did NOT change the above values to 0.

I can confirm I updated CumulusMX by overwriting ALL files.

Disabled Data and debug, the above mentioned values did not change at all.
Regards Simon

https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • CumulusMX • Saratoga Templates •

User avatar
ConligWX
Posts: 798
Joined: Mon 19 May 2014 10:45 pm
Weather Station: Davis vPro2 Plus +DFARS
Operating System: Ubuntu / Windows 10
Location: Bangor, NI
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by ConligWX »

BCJKiwi wrote:
Wed 29 Jul 2020 2:37 am
Also found on restart that some of the items in [Graph] were removed:-
InTempVisible
FeelsLikeVisible
HumidexVisible
again, I dont see this either. those values are still there in my config. came straight from 3088 to 3089 with a full file overwrite.
Regards Simon

https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • CumulusMX • Saratoga Templates •

User avatar
HansR
Posts: 1204
Joined: Sat 20 Oct 2012 6:53 am
Weather Station: Davis Vantage Pro 2+
Operating System: Raspbian GNU/Linux 10 (Buster)
Location: Wagenborgen (NL)
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by HansR »

Form behind the computer, I just tried to confirm the reported issues and I did not succeed.
Conclusion: the issues are most likely local and not code generated.
So: reinstall CMX (full override) and try again?
https://meteo-wagenborgen.nl / Cumulus 3.6.8 (build: 3084)
Davis Vantage Pro 2+ / Raspberry Pi 3 Model B Plus Rev 1.3
Raspbian Linux 10 (buster) / 4.19.118-v7+ armv7l
Mono JIT compiler version 6.8.0.123 (tarball Tue May 12 15:31:43 UTC 2020)

User avatar
mcrossley
Posts: 6771
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by mcrossley »

Sounds like the two /interface/json/Station*.json files haven't been copied over.

Please folks just copy everything over (except maybe the /web folder if you have customised it), too many people miss files trying to copy them individually.

griffo42
Posts: 60
Joined: Thu 10 Dec 2015 6:41 am
Weather Station: Davis Vantage Pro2
Operating System: Win 10
Location: Brisbane, Queensland, Australia
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by griffo42 »

Mine was a rename of what was there for b3088, a full copy of b 3089 and edit cumulus.ini with the changes identified by Mark then go with b 3089 which caused the probs. mentioned earlier.

Keith.
Davis Vantage Pro2 Model #6152AU - CumulusMX - Win10 - Saratoga Scripts
https://www.kstwx.net/index.php
https://www.kstwx.net/mxtest/index.php
Image

griffo42
Posts: 60
Joined: Thu 10 Dec 2015 6:41 am
Weather Station: Davis Vantage Pro2
Operating System: Win 10
Location: Brisbane, Queensland, Australia
Contact:

Re: MX v 3.7.0-b3089 Possible Bug

Post by griffo42 »

Now on b.3089. Reverted to updating b.3088 by copying changed files as advised in release of 28 July rather than creating a completely new version from the download file. All good.

Keith
Davis Vantage Pro2 Model #6152AU - CumulusMX - Win10 - Saratoga Scripts
https://www.kstwx.net/index.php
https://www.kstwx.net/mxtest/index.php
Image

Post Reply