Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024

Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

FTP feed for web site

From build 3044 the development baton passed to Mark Crossley. Mark has been responsible for all the Builds since. He has made the code available on GitHub. It is Mark's hope that others will join in this development, but at the very least he welcomes your ideas for future developments (see Cumulus MX Development suggestions).

Moderator: mcrossley

Post Reply
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

FTP feed for web site

Post by orion_jb2001 »

Hi all,

Been battling with this for days. I have just recently updated my motherboard etc and did a fresh install of windows 10 at the same time. I previously had a webwsite feed, from MX, to my web page, which gave the great wx data and gauges, etc, on line, from my web pages.

I am setting that back up again but am having a devil of a time to get it working. I am following the simple website setup, for MX, from the wiki. I have created a web directory, on my site and have sucessfully uploaded the necessary files etc, into that directory and am sucessfully logging into that directory, according to the ftplog but then some problems. The relevant json files etc seem not to be created by upload, as per the wiki instructions. From what I can see, via my ftp file manager, when I look at the old feed, with the json's loaded etc, in that directory and the directory I have set up, which is indicating no json's being created.

Is there any other instructions for a web site setup, using cumulus ftp, that may help??
Top
stevendt
Posts: 85
Joined: Sat 23 May 2020 4:19 pm
Weather Station: Davis Vatnage Pro2 Plus
Operating System: Windows 7/10
Location: Aberdeen, Scotland

Re: FTP feed for web site

Post by stevendt »

Hi

Better brains than mine will likely be needed here, but you will almost certainly be asked to upload a copy of the ftplog and possibly the main Cumulus log too so that any ftp error messages/codes can be seen

Regards
Dave
Top
water01
Posts: 3246
Joined: Sat 13 Aug 2011 9:33 am
Weather Station: Ecowitt HP2551
Operating System: Windows 10 64bit
Location: Burnham-on-Sea
Contact:
Contact water01

Re: FTP feed for web site

Post by water01 »

Have you ticked "Include graph data files" in Settings / Internet Settings / Web/FTP settings?
David
Image
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

Can supply ftp logs and yes have included graph option. Current as we speak working with ftp server to see what is going on, have found a couple of things but shortly am about to confirm their problem or cumulus problem :)
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

One question the ftp server people were a little confused on, the option delete before upload, does this refer to deleting a file already uploade i.e. refreshing that file??
Top
User avatar
mcrossley
Posts: 12756
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2/WLL
Operating System: Bullseye Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:
Contact mcrossley

Re: FTP feed for web site

Post by mcrossley »

Yes, it deletes the file on the FTP then uploads the new version with the same name. You don't want to use that option unless you really have to.
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

Thanks Mark. From what I am seeing, still dealing with the ftp servers, it does not seem to be creating the json files. The ftp account I have set up, is trying to update these json files, but they don't exist.

log file

2020-06-24 20:32:00.712 FTP[Int]: CumulusMX Connecting to s9.cpcloud.com.au

# Connect()
Status: Connecting to 103.18.109.182:21
Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response: 220-You are user number 2 of 50 allowed.
Response: 220-Local time is now 20:32. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Status: Detected FTP server: PureFTPd
Command: USER cumulus@jeffbartlett.org
Response: 331 User cumulus@jeffbartlett.org OK. Password required
Command: PASS ***
Response: 230 OK. Current restricted directory is /
Command: FEAT
Response: 211-Extensions supported:
Response: EPRT
Response: IDLE
Response: MDTM
Response: SIZE
Response: MFMT
Response: REST STREAM
Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
Response: MLSD
Response: AUTH TLS
Response: PBSZ
Response: PROT
Response: UTF8
Response: TVFS
Response: ESTA
Response: PASV
Response: EPSV
Response: SPSV
Response: ESTP
Response: 211 End.
Status: Text encoding: System.Text.UTF8Encoding
Command: OPTS UTF8 ON
Response: 200 OK, UTF-8 enabled
Command: SYST
Response: 215 UNIX Type: L8
2020-06-24 20:32:00.834 FTP[Int]: Uploading Extra files
2020-06-24 20:32:00.834 FTP[Int]: Uploading standard files

2020-06-24 20:32:00.834FTP[Int]: Uploading web\index.htm to /home/jeffbart/public_html/index.htm

# OpenWrite("/home/jeffbart/public_html/index.htmtmp", Binary)
Command: TYPE I
Response: 200 TYPE is now 8-bit binary

# GetFileSize("/home/jeffbart/public_html/index.htmtmp")
Command: SIZE /home/jeffbart/public_html/index.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/index.htmtmp", 0)
Command: PORT 10,168,0,45,192,26
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/index.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:00.880FTP[Int]: Uploading web\today.htm to /home/jeffbart/public_html/today.htm

# OpenWrite("/home/jeffbart/public_html/today.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/today.htmtmp")
Command: SIZE /home/jeffbart/public_html/today.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/today.htmtmp", 0)
Command: PORT 10,168,0,45,192,27
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/today.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:00.915FTP[Int]: Uploading web\yesterday.htm to /home/jeffbart/public_html/yesterday.htm

# OpenWrite("/home/jeffbart/public_html/yesterday.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/yesterday.htmtmp")
Command: SIZE /home/jeffbart/public_html/yesterday.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/yesterday.htmtmp", 0)
Command: PORT 10,168,0,45,192,28
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/yesterday.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:00.950FTP[Int]: Uploading web\record.htm to /home/jeffbart/public_html/record.htm

# OpenWrite("/home/jeffbart/public_html/record.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/record.htmtmp")
Command: SIZE /home/jeffbart/public_html/record.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/record.htmtmp", 0)
Command: PORT 10,168,0,45,192,29
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/record.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:00.986FTP[Int]: Uploading web\trends.htm to /home/jeffbart/public_html/trends.htm

# OpenWrite("/home/jeffbart/public_html/trends.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/trends.htmtmp")
Command: SIZE /home/jeffbart/public_html/trends.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/trends.htmtmp", 0)
Command: PORT 10,168,0,45,192,30
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/trends.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.022FTP[Int]: Uploading web\gauges.htm to /home/jeffbart/public_html/gauges.htm

# OpenWrite("/home/jeffbart/public_html/gauges.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/gauges.htmtmp")
Command: SIZE /home/jeffbart/public_html/gauges.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/gauges.htmtmp", 0)
Command: PORT 10,168,0,45,192,31
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/gauges.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.057FTP[Int]: Uploading web\thismonth.htm to /home/jeffbart/public_html/thismonth.htm

# OpenWrite("/home/jeffbart/public_html/thismonth.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/thismonth.htmtmp")
Command: SIZE /home/jeffbart/public_html/thismonth.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/thismonth.htmtmp", 0)
Command: PORT 10,168,0,45,192,32
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/thismonth.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.092FTP[Int]: Uploading web\thisyear.htm to /home/jeffbart/public_html/thisyear.htm

# OpenWrite("/home/jeffbart/public_html/thisyear.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/thisyear.htmtmp")
Command: SIZE /home/jeffbart/public_html/thisyear.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/thisyear.htmtmp", 0)
Command: PORT 10,168,0,45,192,33
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/thisyear.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.129FTP[Int]: Uploading web\monthlyrecord.htm to /home/jeffbart/public_html/monthlyrecord.htm

# OpenWrite("/home/jeffbart/public_html/monthlyrecord.htmtmp", Binary)

# GetFileSize("/home/jeffbart/public_html/monthlyrecord.htmtmp")
Command: SIZE /home/jeffbart/public_html/monthlyrecord.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/monthlyrecord.htmtmp", 0)
Command: PORT 10,168,0,45,192,34
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/monthlyrecord.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()
2020-06-24 20:32:01.164 FTP[Int]: Uploading graph data files

2020-06-24 20:32:01.164FTP[Int]: Uploading web\graphconfig.json to /home/jeffbart/public_html/graphconfig.json

# OpenWrite("/home/jeffbart/public_html/graphconfig.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/graphconfig.jsontmp")
Command: SIZE /home/jeffbart/public_html/graphconfig.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/graphconfig.jsontmp", 0)
Command: PORT 10,168,0,45,192,35
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/graphconfig.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.200FTP[Int]: Uploading web\tempdata.json to /home/jeffbart/public_html/tempdata.json

# OpenWrite("/home/jeffbart/public_html/tempdata.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/tempdata.jsontmp")
Command: SIZE /home/jeffbart/public_html/tempdata.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/tempdata.jsontmp", 0)
Command: PORT 10,168,0,45,192,36
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/tempdata.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.236FTP[Int]: Uploading web\pressdata.json to /home/jeffbart/public_html/pressdata.json

# OpenWrite("/home/jeffbart/public_html/pressdata.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/pressdata.jsontmp")
Command: SIZE /home/jeffbart/public_html/pressdata.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/pressdata.jsontmp", 0)
Command: PORT 10,168,0,45,192,37
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/pressdata.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.270FTP[Int]: Uploading web\winddata.json to /home/jeffbart/public_html/winddata.json

# OpenWrite("/home/jeffbart/public_html/winddata.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/winddata.jsontmp")
Command: SIZE /home/jeffbart/public_html/winddata.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/winddata.jsontmp", 0)
Command: PORT 10,168,0,45,192,38
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/winddata.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.305FTP[Int]: Uploading web\wdirdata.json to /home/jeffbart/public_html/wdirdata.json

# OpenWrite("/home/jeffbart/public_html/wdirdata.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/wdirdata.jsontmp")
Command: SIZE /home/jeffbart/public_html/wdirdata.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/wdirdata.jsontmp", 0)
Command: PORT 10,168,0,45,192,39
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/wdirdata.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.341FTP[Int]: Uploading web\humdata.json to /home/jeffbart/public_html/humdata.json

# OpenWrite("/home/jeffbart/public_html/humdata.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/humdata.jsontmp")
Command: SIZE /home/jeffbart/public_html/humdata.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/humdata.jsontmp", 0)
Command: PORT 10,168,0,45,192,40
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/humdata.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.375FTP[Int]: Uploading web\raindata.json to /home/jeffbart/public_html/raindata.json

# OpenWrite("/home/jeffbart/public_html/raindata.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/raindata.jsontmp")
Command: SIZE /home/jeffbart/public_html/raindata.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/raindata.jsontmp", 0)
Command: PORT 10,168,0,45,192,41
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/raindata.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.411FTP[Int]: Uploading web\solardata.json to /home/jeffbart/public_html/solardata.json

# OpenWrite("/home/jeffbart/public_html/solardata.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/solardata.jsontmp")
Command: SIZE /home/jeffbart/public_html/solardata.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/solardata.jsontmp", 0)
Command: PORT 10,168,0,45,192,42
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/solardata.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.446FTP[Int]: Uploading web\dailyrain.json to /home/jeffbart/public_html/dailyrain.json

# OpenWrite("/home/jeffbart/public_html/dailyrain.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/dailyrain.jsontmp")
Command: SIZE /home/jeffbart/public_html/dailyrain.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/dailyrain.jsontmp", 0)
Command: PORT 10,168,0,45,192,43
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/dailyrain.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.693FTP[Int]: Uploading web\sunhours.json to /home/jeffbart/public_html/sunhours.json

# OpenWrite("/home/jeffbart/public_html/sunhours.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/sunhours.jsontmp")
Command: SIZE /home/jeffbart/public_html/sunhours.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/sunhours.jsontmp", 0)
Command: PORT 10,168,0,45,192,44
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/sunhours.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 20:32:01.728FTP[Int]: Uploading web\dailytemp.json to /home/jeffbart/public_html/dailytemp.json

# OpenWrite("/home/jeffbart/public_html/dailytemp.jsontmp", Binary)

# GetFileSize("/home/jeffbart/public_html/dailytemp.jsontmp")
Command: SIZE /home/jeffbart/public_html/dailytemp.jsontmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR /home/jeffbart/public_html/dailytemp.jsontmp", 0)
Command: PORT 10,168,0,45,192,45
Response: 200 PORT command successful
Command: STOR /home/jeffbart/public_html/dailytemp.jsontmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()
Command: QUIT
Response: 221-Goodbye. You uploaded 0 and downloaded 0 kbytes.
Response: 221 Logout.
Status: Disposing FtpSocketStream...
2020-06-24 20:32:01.775 FTP[Int]: Disconnected from s9.cpcloud.com.au

# Dispose()
Status: Disposing FtpClient object...
Status: Disposing FtpSocketStream...
Top
User avatar
mcrossley
Posts: 12756
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2/WLL
Operating System: Bullseye Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:
Contact mcrossley

Re: FTP feed for web site

Post by mcrossley »

It cannot upload anything from what I can see, the path is most likely wrong...
/home/jeffbart/public_html/

If that still looks right, then I'd try it without the leading slash.
home/jeffbart/public_html/

Then...
public_html/
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

Hnmm that is what the ftp server is saying is the correct address and apparently they have tried a test ftp load into a folder and have sucessfully uploaded using those credentials.

Just thinking though, can I manually upload the data from the web file, into the ftp account and then see if it will update them??
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

same result after deleting the leading slash

Status: Connecting to 103.18.109.182:21
Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response: 220-You are user number 3 of 50 allowed.
Response: 220-Local time is now 21:52. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Status: Detected FTP server: PureFTPd
Command: USER cumulus@jeffbartlett.org
Response: 331 User cumulus@jeffbartlett.org OK. Password required
Command: PASS ***
Response: 230 OK. Current restricted directory is /
Command: FEAT
Response: 211-Extensions supported:
Response: EPRT
Response: IDLE
Response: MDTM
Response: SIZE
Response: MFMT
Response: REST STREAM
Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
Response: MLSD
Response: AUTH TLS
Response: PBSZ
Response: PROT
Response: UTF8
Response: TVFS
Response: ESTA
Response: PASV
Response: EPSV
Response: SPSV
Response: ESTP
Response: 211 End.
Status: Text encoding: System.Text.UTF8Encoding
Command: OPTS UTF8 ON
Response: 200 OK, UTF-8 enabled
Command: SYST
Response: 215 UNIX Type: L8
2020-06-24 21:52:00.254 FTP[Int]: Uploading Extra files
2020-06-24 21:52:00.254 FTP[Int]: Uploading standard files

2020-06-24 21:52:00.254FTP[Int]: Uploading web\index.htm to home/jeffbart/public_html/index.htm

# OpenWrite("home/jeffbart/public_html/index.htmtmp", Binary)
Command: TYPE I
Response: 200 TYPE is now 8-bit binary

# GetFileSize("home/jeffbart/public_html/index.htmtmp")
Command: SIZE home/jeffbart/public_html/index.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR home/jeffbart/public_html/index.htmtmp", 0)
Command: PORT 10,168,0,45,214,228
Response: 200 PORT command successful
Command: STOR home/jeffbart/public_html/index.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 21:52:00.303FTP[Int]: Uploading web\today.htm to home/jeffbart/public_html/today.htm

# OpenWrite("home/jeffbart/public_html/today.htmtmp", Binary)

# GetFileSize("home/jeffbart/public_html/today.htmtmp")
Command: SIZE home/jeffbart/public_html/today.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR home/jeffbart/public_html/today.htmtmp", 0)
Command: PORT 10,168,0,45,214,229
Response: 200 PORT command successful
Command: STOR home/jeffbart/public_html/today.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 21:52:00.339FTP[Int]: Uploading web\yesterday.htm to home/jeffbart/public_html/yesterday.htm

# OpenWrite("home/jeffbart/public_html/yesterday.htmtmp", Binary)

# GetFileSize("home/jeffbart/public_html/yesterday.htmtmp")
Command: SIZE home/jeffbart/public_html/yesterday.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR home/jeffbart/public_html/yesterday.htmtmp", 0)
Command: PORT 10,168,0,45,214,230
Response: 200 PORT command successful
Command: STOR home/jeffbart/public_html/yesterday.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()

2020-06-24 21:52:00.376FTP[Int]: Uploading web\record.htm to home/jeffbart/public_html/record.htm

# OpenWrite("home/jeffbart/public_html/record.htmtmp", Binary)

# GetFileSize("home/jeffbart/public_html/record.htmtmp")
Command: SIZE home/jeffbart/public_html/record.htmtmp
Response: 550 Can't check for file existence

# OpenActiveDataStream(PORT, "STOR home/jeffbart/public_html/record.htmtmp", 0)
Command: PORT 10,168,0,45,214,231
Response: 200 PORT command successful
Command: STOR home/jeffbart/public_html/record.htmtmp
Response: 553 Can't open that file: No such file or directory
Status: Disposing FtpSocketStream...

# CloseDataStream()
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

Of course now they are saying it is a cumulus problem as they have tried my credentials on a test site and sucessfully viewed the their uploaded test data on line www
Top
User avatar
mcrossley
Posts: 12756
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2/WLL
Operating System: Bullseye Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:
Contact mcrossley

Re: FTP feed for web site

Post by mcrossley »

Did you try my second suggestion?

The easy way to check is to log in using an FTP client and see which folder it puts you in by default. You then work out the required path from there.
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

yep sorry even worse, wouldn't connect
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

mcrossley wrote: ↑Wed 24 Jun 2020 12:06 pm Did you try my second suggestion?

The easy way to check is to log in using an FTP client and see which folder it puts you in by default. You then work out the required path from there.
Sorry not famliar on how to do that. When you say ftp client, to mean something like filezilla?? And what about manually uploading the files from the web folder, but I note, some of those files have the T in them, is that still an issue?
Top
orion_jb2001
Posts: 46
Joined: Thu 11 Feb 2016 6:00 am
Weather Station: Davis VP2
Operating System: Windows 10
Location: Tamworth, NSW, 2340

Re: FTP feed for web site

Post by orion_jb2001 »

Hmm bit the bullet and uploaded the web files, got rid of the files with the T in them. Web site works displaying as it should but doesnt appear to be updating...??
Top
Post Reply

Return to “Cumulus MX Current (releases since b3043)”