Page 2 of 2
Re: Can't Find Extra Web Files
Posted: Thu 07 Nov 2019 6:22 pm
by mcrossley
On my pi it is /dev/ttyUSB0
It should be whatever you have configured in Cumulus.
Re: Can't Find Extra Web Files
Posted: Thu 07 Nov 2019 7:32 pm
by ronwright418
Thanks Mark, mine is /dev/tty/USB0 also. However, when I log in I can't type anything. Using /dev/ttyUSB0 9600 serial. If I use a faster speed like 19200 I can't open the port. What's next?
Does this have anything to do with using the 3rd party logger?
Ron
Re: Can't Find Extra Web Files
Posted: Fri 08 Nov 2019 4:27 pm
by mcrossley
When putty connects, your keystrokes will not be echoed back on screen (unless you configure putty to locally echo), so just hit <cr> a couple of times to make sure the console is awake and type "SETPER 10", you should get an OK message back (iirc).
Re: Can't Find Extra Web Files
Posted: Fri 08 Nov 2019 7:33 pm
by ronwright418
Don't remember having no echo back with putty before, but it has been several years. Getting no response with '<cr>...+<cr> SETPER 10' . Also tried 'TEST ^j' as Steve suggestd in a different thread. Doing this with Cumulus turned off. With Cumulus turned on I get apparent responses from the console as soon as I start putty (which I cannot type over or break), so I'm sure the console is actively communicating.