Cumulus Support

Hi all.

Bit of a newbie to weatherstations & all but keen to learn.

I have a weather station WH 1080 which I have set up in my network with CumulusMX. This works fine, captures and stores everything ok. However when I close CumulusMX (for ie. system reboot) the next time it starts up it is adding faulty data. It is adding 461km/h wind gusts. 1000s of mm of rain and dew points at -40. I have set up the spike prevention in Calibration with no luck. Not sure where the faulty data is coming from.

When I close cumulus and check the today file all is ok but when I restart the program the faulty data is there. Doing my head in

Do you have any idea what I'm doing wrong and how to fix it? Cheers

Ron

it wont be in today.ini in might be in monthlyalltime.ini and fist you have to stop Cumulus MX and look in Dec18log.txt if it is that mouth


https://cumuluswiki.wxforum.net/a/FAQ#H ... nd_lows.3F


try here

Thanks I see the wrong values. After correcting them and restarting they are being added in once again (they vary from the previous ones). This leaves me with faulty data any time I have to restart CumulusMX

what file u correcting ? u need to edit the Dec18log if it that mouth then restart pm me with all the files in ur data folder and i will have a look

Hi Dazza

Yes thats the one I edited (Dec18log.txt). PM with logs sent

Cheers

and a link to you website so i can see ?

Unfortunately I haven't been able to get CumulusMX accessible outside my local network due to some strange setup in my rental place.

Edit: Oh I got this, not sure if it helps https://www.wunderground.com/personal-w ... =ICAIRNS33

Edit 2: I actually have the Digitech IC0348 (which is apparently the newer model of the XC0348, or so I have been told)

You may have chosen the wrong station type - with or without solar sensors. This will cause ‘live’ data to be read OK but ‘logger’ data as used at startup to be read incorrectly. Note that a station with a solar charger does not necessarily have solar sensors.

Hi Steve

That was it! I changed to Fine instruments without solar and now all data is correct. Thank you