editing with zero, something change.
At least now by web I can see sunset, sunrise time (but I'm thinking they are wrong)
NOAA generating is working, now let's wait for tomorrow to see if fpt upload is working to.
Still, I cannot modify lat\long by web\settings.
There is something more for sure, as I cannot made any changes by web\settings\statio settings, while all the other set up are working and can be modfied\saved.
I'll continue to investigate,but at least thanks a lor for solviming by biggest issue.
Ciao
Marco
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Running NOAA Reports in MX
Moderator: mcrossley
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Running NOAA Reports in MX
For now you could just set the correct latitude and longitude values in Cumulus.ini as decimal values.
Are you entering the values into the admin interface as whole integer number values? Do not use decimal values.
Are you entering the values into the admin interface as whole integer number values? Do not use decimal values.
-
- Posts: 10
- Joined: Thu 22 Aug 2019 11:17 am
- Weather Station: PCE FWS 20
- Operating System: windows 10
Re: Running NOAA Reports in MX
I'll try to work directly in cumulus.ini
By admin interface i enter whole integr number (43 11 17, 13 47 19) but I cannot save. Something strange is that all block where I can write in are red (all the other page are black) and I cannot save.
I'll let you know
Thanks indeed
By admin interface i enter whole integr number (43 11 17, 13 47 19) but I cannot save. Something strange is that all block where I can write in are red (all the other page are black) and I cannot save.
I'll let you know
Thanks indeed
-
- Posts: 10
- Joined: Thu 22 Aug 2019 11:17 am
- Weather Station: PCE FWS 20
- Operating System: windows 10
Re: Running NOAA Reports in MX
finally I found it out
Error was generated by a wrong value in RS Transmission Factor
It was set up at 8 (I don't know how, I never change it) and this is a not acceptale range. I put it to 0,80 and finally admin web page became black and editable.
Now I saved with right lat/lon and it should works fine
Thanks for your prompt support
ciao
Marco
Error was generated by a wrong value in RS Transmission Factor
It was set up at 8 (I don't know how, I never change it) and this is a not acceptale range. I put it to 0,80 and finally admin web page became black and editable.
Now I saved with right lat/lon and it should works fine
Thanks for your prompt support
ciao
Marco