Cumulus Support

Have you supplied the FULL correct serial device name? Have you looked at the FAQ as I suggested, where you would see the following?

"Serial device names on Linux are not COM0 etc as in Windows. You need to specify something like /dev/ttyUSB0 - do a dmesg at a command line prompt and look for the actual device name from your adapter. If dmesg says your cp210x converter (as on Davis stations) is attached to ttyUSB0, for example, you need to put /dev/ttyUSB0 for the serial port name in MX. "

I posted this earlier:

I have put USB0 as the Davies connection serial port name, but still no data. When I run the CumulusMX program it says :
Unable to connect to station Cumulus running at: http://*:8998/

Also as you suggested, I have now got /dev/ttyUSB0 and it is now connected.

Actually you are the first person to tell me that.
Thanks

avvy65 wrote:No I didn't use port 9999.

Your MXDiag logs say different

Weired that, but I couldn't find it where was port 9999.

No wories. thanks again