The brown colored gauges (Wind Compass,Wind Gauge, and Wind Rose) are not showing any data on my gauges web page. Version 1.8.1
http://www.wa4zwc.net/weather/gauges.htm
Thanks for any help,
Jerry
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Gauges Page
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Gauges Page
You're not getting any wind plotted on your graphs either, although you clearly do have some wind. I can't imagine why that's happening, and I can't easily look at the Cumulus code for clues. You could try restarting Cumulus?
Steve
-
- Posts: 20
- Joined: Sat 30 Aug 2008 4:14 pm
- Weather Station: Davis VP2
- Location: Wilmington, NC
- Contact:
Re: Gauges Page
I did restart Cumulus and also rebooted. I am not sure how long this has been going on. It could have been since I upgraded to 1.8.1 but I am not sure.
Everything works well on the program. It's just on the web page side that the problem exists. I also have the box checked to show the graphs in 3d and they are on the program, but not on the web page.
I did uncheck the 3d box and see if that was the problem, but it still existed.
Jerry
Everything works well on the program. It's just on the web page side that the problem exists. I also have the box checked to show the graphs in 3d and they are on the program, but not on the web page.
I did uncheck the 3d box and see if that was the problem, but it still existed.
Jerry
-
- Posts: 280
- Joined: Fri 15 Aug 2008 5:22 pm
- Weather Station: WH 1081 (EasyWeather type)
- Operating System: Win10
- Location: Garforth, W. Yorks, UK
- Contact:
Re: Gauges Page
Try it with Internet Settings/ Use active FTP Mode - both ticked and unticked. My wind gauges were a lot intermitant until I unticked it, but now working fine.
-
- Posts: 20
- Joined: Sat 30 Aug 2008 4:14 pm
- Weather Station: Davis VP2
- Location: Wilmington, NC
- Contact:
Re: Gauges Page
I tried it with Internet Settings/ Use active FTP Mode - both ticked and unticked and no change.
Thanks,
Jerry
Thanks,
Jerry
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Gauges Page
Your images aren't getting uploaded - the times on the graphs don't correspond to the current time. Normally, as Harry has suggested, switching to active ftp mode would fix this, but it clearly doesn't in your case.
Could you please switch on ftp logging (on the configuration menu) and after a few web updates, send me the ftplog.txt file.
Could you please switch on ftp logging (on the configuration menu) and after a few web updates, send me the ftplog.txt file.
Steve