Is there a way to display on my web site just part of the latitude and longitude of my weather station's location - eg just degrees and minutes but no seconds - to avoid revealing my precise address?
I've looked through the available tags and I can only see <#latitude> and <#longitude>, with no finer division (eg <#latitudedegrees>). I realise that I could display the lat/long as decimal degrees, with fewer decimal places.
If it's not currently possible, perhaps you could log it as an enhancement request.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Showing partial lat/long of station location on web site
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Showing partial lat/long of station location on web site
Just hard-code it into the web pages rather than using the web tags.
Steve
-
- Posts: 85
- Joined: Wed 01 Jan 2014 7:54 pm
- Weather Station: Davis Vantage Vue
- Operating System: Raspberry Pi: Raspbian Stretch
- Location: Rudston, North Yorkshire
Re: Showing partial lat/long of station location on web site
That's just what I have done, as a short-term workaround!steve wrote:Just hard-code it into the web pages rather than using the web tags.