Hi guys, I have a problem with the Davis, after a couple of days the wind is blocked.
I believe that the problem is that Cumulusmx does not empty the memory of the console.
could you help me how to configure cumulusmx to delete data in memory of the console?
thank you
Valerio
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Davis Console data cancellation
Moderator: mcrossley
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Davis Console data cancellation
The logger memory is designed to fill, once full it starts overwriting the oldest entries.
You can clear the logger memory, but it is very disruptive and you will probably lose contact with your sensors for a while. It is not recommended.
Is your wind sensor connected to your ISS? Or is it on it's own transmitter?
If it is connected to your ISS, do the other readings also stop - temperature, humidity, rain?
If they are on the same ISS, and the other sensors continue to work, then check the wind sensor connector, check the whole cable for damage etc.
You can clear the logger memory, but it is very disruptive and you will probably lose contact with your sensors for a while. It is not recommended.
Is your wind sensor connected to your ISS? Or is it on it's own transmitter?
If it is connected to your ISS, do the other readings also stop - temperature, humidity, rain?
If they are on the same ISS, and the other sensors continue to work, then check the wind sensor connector, check the whole cable for damage etc.
-
- Posts: 33
- Joined: Thu 14 Nov 2019 5:41 pm
- Weather Station: Davis
- Operating System: Windows Seven
Re: Davis Console data cancellation
I use WiFilogger, no is not a problem of cables, when you unload data with WeatherLink resumes everything to work.
The defect for now I gave it to the speed of the wind.
I believed that on Cumulusmx there was a function to empty the memory buffer every tot. weather.
The defect for now I gave it to the speed of the wind.
I believed that on Cumulusmx there was a function to empty the memory buffer every tot. weather.
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Davis Console data cancellation
There is not ability in Cumulus to reset the logger memory - other than changing the logging interval to a new value and setting back again, and you have the option to change the logger interval enabled.
I really recommend that you do not do this though! The issue is not that the memory is "full" - there is no such thing really - your problem lies elsewhere.
Can you switch on debug logging and post the MXdiags log when the issue next occurs?
I really recommend that you do not do this though! The issue is not that the memory is "full" - there is no such thing really - your problem lies elsewhere.
Can you switch on debug logging and post the MXdiags log when the issue next occurs?
- PaulMy
- Posts: 3777
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Davis Console data cancellation
WiFiLogger has a Setup => Weatherstation setup => Send command to logger => Send Command = CLRLOG (clears the archive data)
But suggest you follow Mark's comments.
Enjoy,
Paul
But suggest you follow Mark's comments.
Enjoy,
Paul
Davis Vantage Pro2+
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX www.komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX www.komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX www. komokaweather.com/cumulusmx4/index.htm
-
- Posts: 33
- Joined: Thu 14 Nov 2019 5:41 pm
- Weather Station: Davis
- Operating System: Windows Seven
Re: Davis Console data cancellation
Thanks guys, now I keep monitored and keep you updated.
When it stops I try to empty the archive with WeatherLink and see if it starts again.
Valerio
When it stops I try to empty the archive with WeatherLink and see if it starts again.
Valerio