Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.3.0 build 3063 - 10 January 2020.
    Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

    See the Wiki for downloading either version.

    GaugesT Vs Gauges-ssT

    Share your Cumulus MX user interface here

    Moderator: mcrossley

    Post Reply
    Phil23
    Posts: 377
    Joined: Sat 16 Jul 2016 11:59 pm
    Weather Station: Davis Vantage Pro2 Plus
    Operating System: Win7 Pro
    Location: Australia

    GaugesT Vs Gauges-ssT

    Post by Phil23 » Thu 26 Jan 2017 3:35 am

    Just looking at the "SteelSeries-Weather-Gauges-master.zip", V2.5.18.

    I notice it includes Gauges-ssT.htm while the MX distribution contains GaugesT.htm.

    If I want to upgrade the Steel Series, do I need to change my other pages to link to this as per the readme, and process & upload it?

    Or,

    Can I,

    1.- Just stick with the gaugesT.htm in the distribution?
    or
    2.- Use the gauges-ssT.htm & rename it to just gaugesT.htm?

    Thanks

    Phil.
    Image

    User avatar
    ConligWX
    Posts: 751
    Joined: Mon 19 May 2014 10:45 pm
    Weather Station: Davis VPro2 Plus +DFARS
    Operating System: MeteoBridge Nano SD
    Location: Bangor, NI
    Contact:

    Re: GaugesT Vs Gauges-ssT

    Post by ConligWX » Thu 26 Jan 2017 8:02 am

    I'm pretty sure you only need to upgrade the Web Server side.
    Regards Simon

    https://www.conligwx.org - @conligwx
    Davis Vantage Pro2 Plus + DFARS - Meteobrige Nano SD + Saratoga Templates

    User avatar
    steve
    Cumulus Author
    Posts: 26717
    Joined: Mon 02 Jun 2008 6:49 pm
    Weather Station: None
    Operating System: None
    Location: Vienne, France
    Contact:

    Re: GaugesT Vs Gauges-ssT

    Post by steve » Thu 26 Jan 2017 12:40 pm

    If you look at the two files, you'll see that the main difference is in the paths to the rqeuired files (MX keeps third party stuff under a 'lib' directory), so whichever file you decide to use you should make sure the paths correspond to where the files actually are. Assuming you do the upgrade by replacing the contents of the MX lib/steelseries directory, you'll need to use the paths in the existing MX file. If you do end up using the file from the latest Steelseries distribution, it makes sense to rename it so MX treats it as its own.

    At some point I'll update the files in the MX distribution to the latest Steelseries release.
    Steve

    Phil23
    Posts: 377
    Joined: Sat 16 Jul 2016 11:59 pm
    Weather Station: Davis Vantage Pro2 Plus
    Operating System: Win7 Pro
    Location: Australia

    Re: GaugesT Vs Gauges-ssT

    Post by Phil23 » Thu 26 Jan 2017 9:04 pm

    Thanks Steve,

    I understand completely now.

    If it helps others,

    GaugesT contains this etc, around line 190:-

    Code: Select all

      <!-- Combined steelseries.js & tween.js -->
      <script src="lib/steelseries/scripts/steelseries_tween.min.js"></script>
    
      <!-- Once you have customised this scripts to your requirements you should minimise
           and concatenate them into a single file in the same order  as below -->
      <script src="lib/steelseries/scripts/language.min.js"></script>
      <script src="lib/steelseries/scripts/gauges.js"></script>
    
    While Gauges-ssT contains this, around line 192:-

    Code: Select all

      <!-- Combined steelseries.js & tween.js -->
      <script src="scripts/steelseries_tween.min.js"></script>
    
      <!-- Once you have customised this scripts to your requirements you should minimise
           and concatenate them into a single file in the same order  as below -->
      <script src="scripts/language.min.js"></script>
      <script src="scripts/gauges.js"></script>
    
    Image

    Post Reply