Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.2.4 build 3060 - 10 December 2019.
    Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

    See the Wiki for downloading either version.

    It must be obvious but ...

    Discussion of version 3 of Cumulus, which runs on Windows, Linux, and OS X. All Cumulus MX queries in here, please.

    Moderator: mcrossley

    Post Reply
    Bernard46
    Posts: 8
    Joined: Tue 21 Jun 2011 9:16 pm
    Weather Station: Oregon Scientific WMR200
    Operating System: Win10
    Location: Harbury, Warwickshire

    It must be obvious but ...

    Post by Bernard46 » Thu 28 Nov 2019 11:46 am

    I've downloaded Cumulus MX on a Win 10 PC (no Unix, no Raspberry Pi). I start it up by clicking on CumulusMX.exe and I get a DOS window coming up saying, amongst a few other things

    Cumulus running at: http://*:8998/
    (Replace * with any IP address on this machine or localhost)
    Type Cty-C to terminate

    Where do I change the * so that it says localhost and then maybe a browser will be launched or do I just ignore this and type http://localhost:8998; into my browser?

    User avatar
    odintheterrible
    Posts: 64
    Joined: Wed 16 Jan 2013 8:18 am
    Weather Station: Aercus WS3083 Wireless
    Operating System: Windows 10 64-bit
    Location: Torre-Pacheco, Murcia, Spain

    Re: It must be obvious but ...

    Post by odintheterrible » Thu 28 Nov 2019 12:34 pm

    Hi there,

    Nothing to worry about with this ... it is purely an informational piece of text.
    To access the settings page for Cumulus MX you would open your browser, and then type in any one of the following according to whether or not the pc you are using is on the same network as the pc running Cumulus MX:
    http://*:8998/
    ... replacing the * with the IP address of the machine running Cumulus MX ... for example: http://123.23.34.5:8998 or http://localhost:8998 or a dynamic DNS address which has been forwarded in the router e.g.: http:// joeblogs.dydns.me:8998

    One thing to remember though is to open the 8998 port in the firewall and forward it in the router to the PC running the software

    When that's done typing the http://address (see above) will open the settings page.

    Hope this helps
    "Qui Custodit Ipsos Custodes ? ..."

    Duct Tape is like 'The Force' ... it has a 'Light Side' AND a 'Dark Side' and it binds the Universe together !

    Post Reply