Hi, all
I have got my new Davis Vantage Vue, changed the station to Davis Vantage Vue. Restarted MX and it says normal running but the dials etc don't give a reading. The Vantage Vue itself seems to be fine and logging all the rain I am having. Cumulus does say: Your console firmware does not support LOOP2. Consider disabling it in culumus.ini
lsusb give the device as Cygnal Integrated Products, Inc. so the laptop can see the station and cumulus says normal running.
So can I have some help
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
New Davis Vantage VUE & Mint
Moderator: mcrossley
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Davis Vantage VUE & Mint
Zip up your MXdiags folder and post it here please.
Re: New Davis Vantage VUE & Mint
As requested
You do not have the required permissions to view the files attached to this post.
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Davis Vantage VUE & Mint
MX is not getting any response at all from the device /dev/ttyUSB0
What do you get from a lsusb command?
If this is a Davis USB interface have you switched it to serial mode with WeatherLink?
What do you get from a lsusb command?
If this is a Davis USB interface have you switched it to serial mode with WeatherLink?