Beta testers wanted for new release.

mcrossley · Post by **mcrossley** » Fri 11 Oct 2019 3:37 pm

I'd ideally like a extra user or two in addition to my usual victims to test the next release.

Specifically I am interested in anyone who has a Davis WeatherLink Live device and would be interested in using Cumulus MX with it.

Anyone interested, please send me your email address via a PM.

beteljuice · Post by **beteljuice** » Fri 11 Oct 2019 4:26 pm

I've reposted this elsewhere Mark

mcrossley · Post by **mcrossley** » Fri 11 Oct 2019 5:02 pm

So I see, thanks.

HansR · Post by **HansR** » Sat 12 Oct 2019 6:19 am

Any use if I don't have a Davis WeatherLink Live device?

Brientim · Post by **Brientim** » Sat 12 Oct 2019 7:20 am

Hi, I would be happy to assist with testing, WLL with two VP2 Pro and Leaf and wetness sensor connect. I can test on MAC, WIN, or Raspi if required.

Brientim · Post by **Brientim** » Sat 12 Oct 2019 7:22 am

Also I cannot PM due to being a new member

Post by **freddie** » Sat 12 Oct 2019 10:27 am

There shouldn't be anything stopping you sending a PM. I just tested using your permissions and managed to send okay.

mcrossley · Post by **mcrossley** » Sat 12 Oct 2019 10:30 am

freddie wrote: ↑Sat 12 Oct 2019 10:27 am There shouldn't be anything stopping you sending a PM. I just tested using your permissions and managed to send okay.

His/her posts were pending approval as a new member - I approved them this morning.

Post by **freddie** » Sat 12 Oct 2019 11:35 am

Ah okay, fair enough. Thanks Mark

mcrossley · Post by **mcrossley** » Sat 12 Oct 2019 3:42 pm

Brientim wrote: ↑Sat 12 Oct 2019 7:20 am Hi, I would be happy to assist with testing, WLL with two VP2 Pro and Leaf and wetness sensor connect. I can test on MAC, WIN, or Raspi if required.

Hi Tim, thanks for the offer, an email is on its way, Windows or RasPi is probably easiest though some folks are running on macOS.

Brientim · Post by **Brientim** » Sat 12 Oct 2019 10:57 pm

mcrossley wrote: ↑Sat 12 Oct 2019 3:42 pm
Brientim wrote: ↑Sat 12 Oct 2019 7:20 am Hi, I would be happy to assist with testing, WLL with two VP2 Pro and Leaf and wetness sensor connect. I can test on MAC, WIN, or Raspi if required.
Hi Tim, thanks for the offer, an email is on its way, Windows or RasPi is probably easiest though some folks are running on macOS.

Mark, I have downloaded and configured on Windows, MACOS and I have sent an email to you. Both the Win and MAC are working fine. I am about to upgrade windows to 1903 so that will be offline whilst this is pushed. I am about to set up an RasPi

beteljuice · Post by **beteljuice** » Sun 13 Oct 2019 12:42 am

I am about to upgrade windows to 1903 ...

Screwed my old laptop, had to roll-back - fortunately hasn't tried to do it again !

Mudary · Post by **Mudary** » Mon 14 Oct 2019 2:33 am

RPI 3, Davis Pro 2 cabled, station about 8 years old. USB logger.
Buster OS

mcrossley · Post by **mcrossley** » Mon 14 Oct 2019 7:19 pm

Mudary wrote: ↑Mon 14 Oct 2019 2:33 am RPI 3, Davis Pro 2 cabled, station about 8 years old. USB logger.
Buster OS

Not sure what this has to do with the beta as it is build 3052?

Whatever, the station is not available on the port you have selected.

Mudary · Post by **Mudary** » Mon 14 Oct 2019 7:52 pm

Yes, it's version 3052. I rebooted the rpi 3+ buster, ill see if the error shows up again.

Cumulus Support

Beta testers wanted for new release.

Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.

Re: Beta testers wanted for new release.