Hello everyone!
I created a new image, with the new Raspy 10 BUSTER, however it seems there is a problem in the management of the log.
Version: Raspbian Buster Lite V. 20/06/2019 (and 10/07/2019) & Cumulus MX Release 3.0.0 b3050
This involves problems with graphics, and NOAA file management.
When the raspberry is restarted, a NUL line is created.
The line is very long, after the NUL series a data string appears. But cumulus goes wrong. Test done with raspy Pi0W and Pi2b.
This happens to me because every night, I restart the raspberry. Or if I restart it to do tests.
Pay attention that before the restart, the command is launched
sudo /home/pi/CumulusMX/cumulusmx.sh -q
sudo shutdown -r now
this to avoid a sudden closure of cumulus.
What do you suggest ????
Thank you!
andrea iw2ntf
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
LOG ERROR
Moderator: mcrossley
-
- Posts: 29
- Joined: Fri 17 Aug 2018 8:11 pm
- Weather Station: Davis VP2 Plus
- Operating System: Raspbian on Raspberry
- Location: Gaggiano - MI - ITA
- Contact:
LOG ERROR
You do not have the required permissions to view the files attached to this post.
-
- Posts: 214
- Joined: Tue 24 Nov 2015 11:30 pm
- Weather Station: Fine Offset & Davis Vantage Vue
- Operating System: Windows 10; Raspbian Buster
- Location: Switzerland
Re: LOG ERROR
I'm using a similar setup - RPi Zero W, CumulusMX and a scheduled daily reboot at 0253
I recently changed From Stretch to Buster, and from an earlier CumulusMX build to 3050,
I have no such similar problem. In these examples, the RPi rebooted between the lines shown
With the old system:
and with the new:
I don't know what your shutdown script (cumulusmx.sh) contains. It's not part of the distribution - so must be something you've added and may be the cause of your problem?
All I do is run the standard reboot command from my crontab without stopping CumulusMX first. I believe this properly closes all running programs (or at least it tells them to close - but will still reboot if something has crashed).
I recently changed From Stretch to Buster, and from an earlier CumulusMX build to 3050,
I have no such similar problem. In these examples, the RPi rebooted between the lines shown
With the old system:
Code: Select all
07/08/19,02:51,18.4,78,14.5,0.0,0.0,0,0.0,0.0,1026.7,954.3,26.6,45,0.0,18.4,18.4,0.0,0,0.00,0.00,19.8,0,0.0,0,0.0,0.0
07/08/19,03:01,18.5,79,14.8,0.0,0.7,0,0.0,0.0,1026.5,954.3,26.6,45,0.7,18.5,18.5,0.0,0,0.00,0.00,20.0,0,0.0,270,0.0,0.0
Code: Select all
23/08/19,02:50,13.6,94,12.7,0.2,1.6,357,0.0,0.0,1039.1,1021.5,24.9,52,0.0,13.6,13.6,0.0,0,0.00,0.00,14.4,0,0.0,0,0.0,0.0
23/08/19,03:00,13.7,94,12.8,0.0,0.0,0,0.0,0.0,1039.0,1021.5,24.9,51,0.0,13.7,13.7,0.0,0,0.00,0.00,14.5,0,0.0,0,0.0,0.0
All I do is run the standard reboot command
Code: Select all
sudo reboot