Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.0.0 build 3050 - 1 May 2019.
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

See the Wiki for downloading either version.

weatherlink ip data logger

Discussion of version 3 of Cumulus, which runs on Windows, Linux, and OS X. All Cumulus MX queries in here, please.

Moderator: mcrossley

Post Reply
G6GUH
Posts: 54
Joined: Sat 23 Mar 2013 9:29 am
Weather Station: Davis VP2 Pro
Operating System: Windows 10
Location: Church Stretton, Shropshire

weatherlink ip data logger

Post by G6GUH » Thu 02 May 2019 1:42 pm

HI
Just trying to set up an IP datalogger to work with MX3048, the set up works fine with the USB logger bu I am unable to get the ip logger to talk with MX. The logger will talk ok to to WeatherLink 6.0.4 so I know that the logger is working. In MX station setup I have set the type to TCP/IP and the ip address to that at which the logger is connected to the network. TCP port is 22222 which the same as the one set on the logger, have tried disconnect time to 0 and 1.

Is there anything to be changed else where ?

Thanks Pete

G6GUH
Posts: 54
Joined: Sat 23 Mar 2013 9:29 am
Weather Station: Davis VP2 Pro
Operating System: Windows 10
Location: Church Stretton, Shropshire

Re: weatherlink ip data logger

Post by G6GUH » Thu 02 May 2019 2:29 pm

I think that I have sorted the problem out, MX does upload to a web page but it appears that it cannot be seen when trying to vie on the dashboard, that may be due to the fact that there is already another installation already working and up loading at the moment so I will try closing the firs version down and then see if it can be viewed.

Pete

Post Reply